The 836T-T352JX6 Electromechanical Pressure Controller is a solid-state pressure control device by Allen-Bradley. This device is designed to control and monitor pressure conditions in a system. The 836T-T352JX6 Electromechanical Pressure Controller comes with factory modifications. The pressure connection for this device is modified to a female SAE 9/16-18 UNF thread O-ring boss seal, which is designed to prevent leakage and minimizes the loss of hydraulic fluids. The 836T-T352JX6 Electromechanical Pressure Controller features a piston-type of control mechanism with a seal. This piston is suitable for water and oil-based hydraulic operations and in applications where a fluid return line is not required. The 836T-T352JX6 Electromechanical Pressure Controller comes with a standard diaphragm assembly that prevents fluids from entering into the enclosure and with a direct piston and level mechanism.

The 836T-T352JX6 Electromechanical Pressure Controller has a 2-circuit snap-action contact block which has a normally closed and a normally open contact. These contacts can be wired for either single-pole configuration or a separate circuit configuration. Each contact has a continuous current rating of 10 Amps and a maximum switching voltage rating of 600 Volts AC. The 836T-T352JX6 Electromechanical Pressure Controller has a typical repeated accuracy rating of +/-3% and for optimum and long-lasting use, it is recommended to use this device within 30 to 80% of the operation range and below the maximum surge rating. The 836T-T352JX6 Electromechanical Pressure Controller features adjustable operating and differential pressure ranges. The differential values can be adjusted from 300 to 400 PSI while the operating range can be adjusted from 400 to 3000 PSI. The 836T-T352JX6 Electromechanical Pressure Controller comes in a NEMA Type 1, 4, and 13 rated enclosure and it is suitable for any mounting configuration.