836T-T400JX26 | Allen Bradley Motors 836 Pressure Controls

836T-T400JX26

836T-T400JX26

Description:

The 836T-T400JX26 controller is a pressure controller. It belongs to the Bulletin 836T product line from Allen-Bradley. The controller features a special diaphragm and O-ring assembly with a diaphragm made of Viton and Nomex fabric.

Rated 4.7 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 836T-T400JX26

Add more parts to quote

Description:

The 836T-T400JX26 controller is a pressure controller. It belongs to the Bulletin 836T product line from Allen-Bradley. The controller features a special diaphragm and O-ring assembly with a diaphragm made of Viton and Nomex fabric.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 836T-T400JX26.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 20 reviews

    Technical Specifications for 836T-T400JX26

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T400JX26
Product typePressure Controller
StyleT
Air TightYes
ActuatorPiston With Seal
Occasional Surge Pressure15,000 PSI
Circuits2
Contact BlockSPDF
Adjustable High-Trip Setting500 to 3000 PSI
Adjustable Low Reset Setting0 to 250 PSI
Operating Temperature-30 to 66 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T400JX26
Product typePressure Controller
StyleT
Air TightYes
ActuatorPiston With Seal
Occasional Surge Pressure15,000 PSI
Circuits2
Contact BlockSPDF
Adjustable High-Trip Setting500 to 3000 PSI
Adjustable Low Reset Setting0 to 250 PSI
Operating Temperature-30 to 66 degrees Celsius
s

About 836T-T400JX26

The Allen-Bradley 836T-T400JX26 controller is a pressure controller designed for industrial applications including material damping fixtures, air compressors, compact ram pressure, and machine hydraulic press applications. It is a device that is designed to activate electrical circuits based on the hydraulic or pneumatic pressure which is applied to its actuator. The trip and reset settings for the 836T-T400JX26 controller are adjustable. The trip setting is the pressure setting at which the electrical contacts are activated. The reset setting is the pressure setting at which the electrical contacts return to their normal state. Additionally, the operating pressure range for the 836T-T400JX26 controller and the differential range are also adjustable. The 836T-T400JX26 controller is a Style T pressure controller which has a piston (with a seal) as the actuator. It uses a 2-circuit SPDF contact block.



 



The trip and reset settings on the 836T-T400JX26 controller are not only adjustable but independently adjustable. The pressure contact is available in an oil tight NEMA Type 1, 4, and 13 rated industrial enclosure. The controller can handle occasional surge pressures of up to 15,000 PSI. The adjustable high trip setting range for the 836T-T400JX26 controller is 500 to 3000 PSI and the adjustable low reset setting range for the controller is 0 to 250 PSI. The control is equipped with a special diaphragm and O-ring assembly in which the diaphragm is made of Viton and Nomex fabric. This type of diaphragm is required when phosphate ester base and various other caustic hydraulic fluids are present. Using the 836T-T400JX26 controller with water is not recommended. The operating temperature range for the pressure controller is from -30 to 66 degrees Celsius.



Repair Services for 836T-T400JX26

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-T400JX26. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 836T-T400JX26

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 836T-T400JX26

Resolutions For 836T-T400JX26

About

Technical Specifications for 836T-T400JX26

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T400JX26
Product typePressure Controller
StyleT
Air TightYes
ActuatorPiston With Seal
Occasional Surge Pressure15,000 PSI
Circuits2
Contact BlockSPDF
Adjustable High-Trip Setting500 to 3000 PSI
Adjustable Low Reset Setting0 to 250 PSI
Operating Temperature-30 to 66 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T400JX26
Product typePressure Controller
StyleT
Air TightYes
ActuatorPiston With Seal
Occasional Surge Pressure15,000 PSI
Circuits2
Contact BlockSPDF
Adjustable High-Trip Setting500 to 3000 PSI
Adjustable Low Reset Setting0 to 250 PSI
Operating Temperature-30 to 66 degrees Celsius

About 836T-T400JX26

The Allen-Bradley 836T-T400JX26 controller is a pressure controller designed for industrial applications including material damping fixtures, air compressors, compact ram pressure, and machine hydraulic press applications. It is a device that is designed to activate electrical circuits based on the hydraulic or pneumatic pressure which is applied to its actuator. The trip and reset settings for the 836T-T400JX26 controller are adjustable. The trip setting is the pressure setting at which the electrical contacts are activated. The reset setting is the pressure setting at which the electrical contacts return to their normal state. Additionally, the operating pressure range for the 836T-T400JX26 controller and the differential range are also adjustable. The 836T-T400JX26 controller is a Style T pressure controller which has a piston (with a seal) as the actuator. It uses a 2-circuit SPDF contact block.



 



The trip and reset settings on the 836T-T400JX26 controller are not only adjustable but independently adjustable. The pressure contact is available in an oil tight NEMA Type 1, 4, and 13 rated industrial enclosure. The controller can handle occasional surge pressures of up to 15,000 PSI. The adjustable high trip setting range for the 836T-T400JX26 controller is 500 to 3000 PSI and the adjustable low reset setting range for the controller is 0 to 250 PSI. The control is equipped with a special diaphragm and O-ring assembly in which the diaphragm is made of Viton and Nomex fabric. This type of diaphragm is required when phosphate ester base and various other caustic hydraulic fluids are present. Using the 836T-T400JX26 controller with water is not recommended. The operating temperature range for the pressure controller is from -30 to 66 degrees Celsius.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-T400JX26. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-T400JX26. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF