Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 842 Encoders 842E-CM-SIP4BA

Product image is representative; revision or series may vary. Contact us to request a specific version.

842E-CM-SIP4BA

|

The Allen-Bradley 842E-CM-SIP4BA Ethernet IP Encoder is the part number for an Ethernet-enabled single-turn encoder interface from the Bulletin 842E-CM encoder family in the 842 Encoders series. This device has a single-turn encoder and it supports CIP Sync and CIP motion technology. Its power consumption rating is 3 Watts.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 842E-CM-SIP4BA

ManufacturerAllen Bradley
CategoryMotors
Product Line842 Encoders
Part Number842E-CM-SIP4BA
UPC885630566924
Weight10.00 lbs (4.54 kg)
DescriptionEthernet/IP Encoder
Operating Voltage Range10 to 30 Volts DC
Maximum Current Rating200 milliamps
Power Consumption3 Watts
Bus ConnectionEthernet/IP IEC 61784-1
Transmission Rate10/100 Mbps
Resolution18-bit
Mechanical InterfaceSolid Shaft 10 Millimeters with Flat
Connector TypeM12 Connector
Enclosure RatingIP 65

The Allen-Bradley 842E-CM-SIP4BA Ethernet/IP Encoder is the part number for an Ethernet-enabled single-turn encoder interface from the Bulletin 842 Encoders series. These Ethernet/IP-enabled encoders are designed to provide creative solutions for applications that complement the Kinetix 5000 and 5,500 architectures. The 842E-CM-SIP4BA Ethernet/IP Encoder provides auxiliary feedback via the Ethernet/IP network, eliminating the need for point-to-point wiring while allowing the users to use the device in a wide range of network topologies. The 842E-CM-SIP4BA Ethernet/IP Encoder features an Ethernet/IP interface with an embedded switch for topology flexibility for the Star, Linear, and Device Level Ring (DLR) topologies. The 842E-CM-SIP4BA Ethernet/IP Encoder offers different options to set IP addresses, and these include hardware switches, the dynamic host configuration protocol (DHCP), or on add-on profiles.

The 842E-CM-SIP4BA Ethernet/IP Encoder has an operating voltage range of 10 to 30 Volts DC with 200 milliamps of maximum current draw at 24 Volts DC and a maximum power consumption rating of 3 Watts. It has a standard transmission rate of 10/10 Megabits per second (Mbps) via a Cat-5e cable. The 842E-CM-SIP4BA Ethernet/IP Encoder has a single-turn type of encoder with 18-bit resolution and a maximum repeatability of +/-0.002 degrees. The 842E-CM-SIP4BA Ethernet/IP Encoder has an I P65 ingress protection rating for protection in a harsh industrial environment.