Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 852S Timers 852S-A

Product image is representative; revision or series may vary. Contact us to request a specific version.

852S-A

|
Need a Specific Revision?

The catalog number 852S-A is reserved for a timer unit manufactured by Allen-Bradley/Rockwell Automation. This solid state timing relay is part of Series G and it provides a minimum time delay of 0.1 seconds. The output contact rating of the unit includes maximum voltage of 300 Volts and maximum current of 3 Amps. This Bulletin 852S timing unit has a NEMA-rated open enclosure and it includes 120 Volts (60 Hertz) or 110 Volts (50 Hertz) line voltage.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 852S-A

ManufacturerAllen Bradley
CategoryMotors
Product Line852S Timers
Part Number852S-A
Weight1.69 lbs (0.77 kg)
Timing Range0.1 to 5 Seconds
Line Voltage110 to 120 Volts AC
Current Rating3 Amps (Maximum)
Voltage Rating300 Volts AC/DC (Maximum)
Line Frequency50 to 60 Hertz
CertificationsUL, CSA
EnclosureOpen
Make Amps for 150 Volts AC30
Break Amps for 150 Volts AC3
Request a Repair

The catalog number 852S-A is used for a timer unit that has been designed and made by Allen-Bradley/Rockwell Automation. The unit weighs only 480 grams (1 pound) and it has an open enclosure. The voltage rating of the 852S-A timer unit is 300 Volts AC/DC (maximum) and the current rating is 3 Amps (maximum). In addition to that, the unit has a line voltage of 110 to 120 Volts AC and a line frequency of 50 to 60 Hertz. Additionally, this component meets the demands of standards like the CSA and UL standards. The 852S-A timing unit provides a timing range of 0.1 to 5 seconds. This solid-state timer component is part of the 852S timers product line and Series G.

The Allen-Bradley 852S-A timing relay is used with isolated initiator contacts in order to avoid damages. In regard to specifications of the unit, the 852S-A unit has 30 make Amps and 3 break Amps for 150 Volts AC voltage along with 15 make Amps and 1.5 break Amps for 300 Volts AC voltage. For the DC voltage, the unit has 1.1 make Amps and the same value of brake Amps for the voltage range of 115 to 125 Volts DC. For 230 to 250 Volts DC voltage, the unit has 0.55 make Amps and the same value of break Amps. The 852S-A timer unit mounts on Bulletin 700 2-pole and 4-pole Type N and Type R relays or 2-pole Type NM and Type RM relays. The basic relays require no changes in order to be able to host a timer unit.