Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Bulletin 875CP 875CP-D20NN30-D4

Product image is representative; revision or series may vary. Contact us to request a specific version.

875CP-D20NN30-D4

|
Need a Specific Revision?

The 875CP-D20NN30-D4 proximity sensor from Allen Bradley features a 30 mm threaded barrel design. It is intended for sensing distances spanning from 5 to 20 mm and operates as an unshielded device, suitable for industrial applications that require a reliable output.

Ships Tomorrow.
2 Year DO Supply Warranty
In Stock
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 875CP-D20NN30-D4

ManufacturerAllen Bradley
Product TypeProximity sensor
Product LineBulletin 875CP
Part Number875CP-D20NN30-D4
Barrel Diameter30 mm
Barrel TypeThreaded
Sensing Distance5 to 20 mm
ShieldedNo
Switching Frequency25 kHz
Output ConfigurationNO NPN
StyleMicro QD
Load Current≤400 mA
EnclosureNEMA 12
Protection ClassIP65
Unshielded DeviceYes
Request a Repair

The Allen Bradley 875CP-D20NN30-D4 is a proximity sensor characterized by its 30 mm diameter and threaded barrel type. It is essential for applications that necessitate precise proximity detection within a sensing distance range of 5 to 20 mm. Unlike shielded alternatives, this sensor is unshielded, making it suitable for specific environments where interference is not a concern.

This proximity sensor switches at a frequency of 25 kHz, providing fast response times for various applications. Its output configuration is set to normally open (NO) NPN, enabling simple integration into control circuits. The load current capability is rated at a maximum of 400 mA, ensuring adequate operation in most scenarios. Enclosed in a NEMA 12 housing, this sensor is designed for environments where dust and dirt may be present while offering protection classified at IP65. This level of ingress protection indicates that the device is both dust-tight and protected against low-pressure water jets, making it suitable for multiple industrial applications.