Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Bulletin CAB6 CAB6-250-EI-11-10

Product image is representative; revision or series may vary. Contact us to request a specific version.

CAB6-250-EI-11-10

|
Need a Specific Revision?

The CAB6-250-EI-11-10 from Allen Bradley is a robust high current IEC contactor designed for demanding applications. This device features a 3-pole configuration with a substantial rated current of 250 Amperes, making it suitable for high-power operations.

Available Now
2 Year DO Supply Warranty
In Stock
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for CAB6-250-EI-11-10

ManufacturerAllen Bradley
Product TypeHigh Current IEC Contactor
Product LineBulletin CAB6
Part NumberCAB6-250-EI-11-10
Poles3-Pole
Rated Current250 Amperes
Auxiliary Contacts1 Normally Open (NO) + 1 Normally Closed (NC)
Interface ModuleAddressed by 24 Volts DC from PLC
Utilization CategoryAC-3
Mechanical DurabilityUp to 10 million operations
MountingPanel or DIN Rail
Electronic InterfaceElectronic coil control module
Coil Voltage110-130 Volts AC; 110-125 Volts DC
Power150 HP
TerminalsBolt/Lug
CertificationIEC, UL, CSA
Request a Repair

The Allen Bradley CAB6-250-EI-11-10 is engineered as a high current IEC contactor, ideal for substantial industrial applications. It features a three-pole configuration, allowing for a rated current capacity of 250 Amperes. This capability makes the device suitable for handling significant electrical loads with efficiency.

Incorporating a diversity of functionalities, the contactor is equipped with auxiliary contacts, including one normally open (NO) and one normally closed (NC). The unit utilizes an interface module that can be controlled through a 24 Volts DC signal from a programmable logic controller (PLC). Its utilization category is AC-3, making the contactor well-suited for motor control applications.

This contactor has a remarkable mechanical durability that supports operation for up to 10 million cycles, ensuring longevity even in rigorous environments. It can be easily mounted on either a panel or a DIN rail, offering flexibility in installation. The electronic coil control module provides advanced functionality, with the coil operating at a voltage range of 110-130 Volts AC or 110-125 Volts DC.

Supporting power levels up to 150 HP, the CAB6-250-EI-11-10 is equipped with bolt/lug terminals for secure connections. This product adheres to various certifications, including IEC, UL, and CSA, ensuring compliance with international safety and performance standards. Overall, this contactor presents a reliable solution for high-capacity applications.