193-EC1PB - In Stock | Allen Bradley Motors E1 Plus Relays

193-EC1PB

193-EC1PB

Description:

The 193-EC1PB overload relay unit designed by Allen-Bradley is an E3 relay variant that comes with two inputs and one output. The unit as an adjustment rating of 0.4 to 2 Amps and a rated insulation voltage of 690 Volts AC. The rated frequency is 20 to 250 Hertz.

Rated 4.8 with 18 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

In Stock Ships Today

Submit RFQ for 193-EC1PB

Add more parts to quote

Description:

The 193-EC1PB overload relay unit designed by Allen-Bradley is an E3 relay variant that comes with two inputs and one output. The unit as an adjustment rating of 0.4 to 2 Amps and a rated insulation voltage of 690 Volts AC. The rated frequency is 20 to 250 Hertz.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 193-EC1PB.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 18 reviews

    Technical Specifications for 193-EC1PB

BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC1PB
TypeE3
Adjustment rating0.4 to 2 Amps
Contactor sizeC09 to C23
Number of inputs2
Number of outputs1
Rated insulation voltage690 Volts AC
Rated frequency20 to 250 Hertz
Standards/certificationsCSA C22.2 No. 14, UL 508, UL 1053, CE, cUL, etc.
Operating temperature-20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit)
Storage temperature-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
Weight0.8 kilograms (1.7 pounds)
BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC1PB
TypeE3
Adjustment rating0.4 to 2 Amps
Contactor sizeC09 to C23
Number of inputs2
Number of outputs1
Rated insulation voltage690 Volts AC
Rated frequency20 to 250 Hertz
Standards/certificationsCSA C22.2 No. 14, UL 508, UL 1053, CE, cUL, etc.
Operating temperature-20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit)
Storage temperature-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
Weight0.8 kilograms (1.7 pounds)
s

About 193-EC1PB

The 193-EC1PB relay is an overload relay unit by Allen-Bradley/Rockwell Automation. The unit is part of the Bulletin 193-EC product line and it allows communication through the DeviceNet network. The DeviceNet network supports polled I/O messaging, explicit messaging, auto-baud network rate identification, and unconnected message managing. The overload relay has buttons for testing and resetting itself, along with status indicators that are LED lights. The status indicators indicate the network status, that status of closed contacts, warnings, and tripping. Also, the 193-EC1PB overload relay provides protection from underload or undercurrent situation if conditions like tool breakage, belt breakage, or pump cavitation occur. The unit has functions for diagnostics and current monitoring, and several protective functions. The protective functions of the unit include thermal overload, over-temperature, remote trip, current imbalance, phase loss, and ground fault protection.



 



The Allen-Bradley 193-EC1PB overload relay has an E3 configuration and it features a current adjustment range of 0.4 to 2 Amps. The relay component supports a contactor size of C09 to C23. Like other E3 overload relay units from this product series, it includes 2 inputs and 1 output. The operating frequency range is 20 to 250 Hertz while the rated insulation voltage is 690 Volts AC. The unit meets requirements from all the applicable standards and it includes certifications from the CCC, CE, and the ABS. The 193-EC1PB electronic overload relay dissipates 3.83 Watts of maximum heat and it consumes up to 3.2 Watts of power. The unit has a moderate resistance to shocks and vibrations and it has the 1P1X degree of protection. According to the requirements of the systems operating in industrial environments, the unit is adjusted for typical operating temperatures and conditions.



Repair Services for 193-EC1PB

Type Lead Time Price Action
Repair Service 2-4 weeks $247cartAdd to Cart

Our highly skilled technicians can repair your 193-EC1PB. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 193-EC1PB

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 193-EC1PB

Resolutions For 193-EC1PB

About

Technical Specifications for 193-EC1PB

BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC1PB
TypeE3
Adjustment rating0.4 to 2 Amps
Contactor sizeC09 to C23
Number of inputs2
Number of outputs1
Rated insulation voltage690 Volts AC
Rated frequency20 to 250 Hertz
Standards/certificationsCSA C22.2 No. 14, UL 508, UL 1053, CE, cUL, etc.
Operating temperature-20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit)
Storage temperature-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
Weight0.8 kilograms (1.7 pounds)
BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC1PB
TypeE3
Adjustment rating0.4 to 2 Amps
Contactor sizeC09 to C23
Number of inputs2
Number of outputs1
Rated insulation voltage690 Volts AC
Rated frequency20 to 250 Hertz
Standards/certificationsCSA C22.2 No. 14, UL 508, UL 1053, CE, cUL, etc.
Operating temperature-20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit)
Storage temperature-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
Weight0.8 kilograms (1.7 pounds)

About 193-EC1PB

The 193-EC1PB relay is an overload relay unit by Allen-Bradley/Rockwell Automation. The unit is part of the Bulletin 193-EC product line and it allows communication through the DeviceNet network. The DeviceNet network supports polled I/O messaging, explicit messaging, auto-baud network rate identification, and unconnected message managing. The overload relay has buttons for testing and resetting itself, along with status indicators that are LED lights. The status indicators indicate the network status, that status of closed contacts, warnings, and tripping. Also, the 193-EC1PB overload relay provides protection from underload or undercurrent situation if conditions like tool breakage, belt breakage, or pump cavitation occur. The unit has functions for diagnostics and current monitoring, and several protective functions. The protective functions of the unit include thermal overload, over-temperature, remote trip, current imbalance, phase loss, and ground fault protection.



 



The Allen-Bradley 193-EC1PB overload relay has an E3 configuration and it features a current adjustment range of 0.4 to 2 Amps. The relay component supports a contactor size of C09 to C23. Like other E3 overload relay units from this product series, it includes 2 inputs and 1 output. The operating frequency range is 20 to 250 Hertz while the rated insulation voltage is 690 Volts AC. The unit meets requirements from all the applicable standards and it includes certifications from the CCC, CE, and the ABS. The 193-EC1PB electronic overload relay dissipates 3.83 Watts of maximum heat and it consumes up to 3.2 Watts of power. The unit has a moderate resistance to shocks and vibrations and it has the 1P1X degree of protection. According to the requirements of the systems operating in industrial environments, the unit is adjusted for typical operating temperatures and conditions.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $247cartAdd to Cart

Our highly skilled technicians can repair your 193-EC1PB. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $247cartAdd to Cart

Our highly skilled technicians can repair your 193-EC1PB. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF