DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The E3 electronic overload relay with the product code 193-EC1ZZ that is made by Allen-Bradley has a current rating of 9 to 5000 Amps and a rated voltage of 690 Volts AC. The rated frequency of this high-quality component is 20 to 250 Hertz.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 193-EC1ZZ. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC1ZZ |
Type | E3 |
Adjustment rating | 9 to 5000 Amps |
Contactor size | Panel mount |
Number of inputs | 2 |
Number of outputs | 1 |
Rated insulation voltage | 690 Volts AC |
Rated frequency | 20 to 250 Hertz |
Standards/certifications | CSA C22.2 No. 14, UL 508, UL 1053, CE, cUL, etc. |
Operating temperature | -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) |
Storage temperature | -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) |
Weight | 0.8 kilograms (1.7 pounds) |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC1ZZ |
Type | E3 |
Adjustment rating | 9 to 5000 Amps |
Contactor size | Panel mount |
Number of inputs | 2 |
Number of outputs | 1 |
Rated insulation voltage | 690 Volts AC |
Rated frequency | 20 to 250 Hertz |
Standards/certifications | CSA C22.2 No. 14, UL 508, UL 1053, CE, cUL, etc. |
Operating temperature | -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) |
Storage temperature | -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) |
Weight | 0.8 kilograms (1.7 pounds) |
The Bulletin 193-EC electronic overload relay component that is known as the 193-EC1ZZ relay is one of many available protective devices by Allen-Bradley/Rockwell Automation. The unit includes the CE, ABS, CCC, cUL, and C-Tick certifications, and it complies with standards like the CSA C22.2 (No. 14), EN 60947-4-1, and UL 508 standards. The overload relays from the 193-EC series offer programmable trip and warning settings, true RMS current sensing, ambient temperature compensation, LED indicators, compatibility with the DeviceNet network, and node address switches. The 193-EC1ZZ overload relay is an E3 relay variant with capabilities like thermal overload, current monitoring functions, diagnostic functions, stall, jam (overcurrent), ground fault, phase loss, and over-temperature protection.
The 193-EC1ZZ overload relay supports the M5 terminal type and three-pole terminal blocks. The unit is also available with terminal lug kits which are made in a couple of variants. The unit has maximum available fault current of 5000 Amps and maximum voltage of 600 Amps according to the UL standards. The power consumption of the control circuits on the 193-EC1ZZ relay is 3.2 Watts and the rated supply voltage is 24 Volts DC. The operating voltage range of the control circuits is 11 to 25 Volts DC. In regard to the available inputs and outputs, the 193-EC1ZZ overload relay has 2 inputs and a single output. The adjustable current rating of the unit is 9 to 5000 Amps and its contactor is panel mounted. The typical operating frequency of the unit is 20 to 250 Hertz. The E3 relay is a small component with an approximate weight of 0.8 kilograms or 1.7 pounds.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 193-EC1ZZ. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC1ZZ |
Type | E3 |
Adjustment rating | 9 to 5000 Amps |
Contactor size | Panel mount |
Number of inputs | 2 |
Number of outputs | 1 |
Rated insulation voltage | 690 Volts AC |
Rated frequency | 20 to 250 Hertz |
Standards/certifications | CSA C22.2 No. 14, UL 508, UL 1053, CE, cUL, etc. |
Operating temperature | -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) |
Storage temperature | -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) |
Weight | 0.8 kilograms (1.7 pounds) |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC1ZZ |
Type | E3 |
Adjustment rating | 9 to 5000 Amps |
Contactor size | Panel mount |
Number of inputs | 2 |
Number of outputs | 1 |
Rated insulation voltage | 690 Volts AC |
Rated frequency | 20 to 250 Hertz |
Standards/certifications | CSA C22.2 No. 14, UL 508, UL 1053, CE, cUL, etc. |
Operating temperature | -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) |
Storage temperature | -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) |
Weight | 0.8 kilograms (1.7 pounds) |
The Bulletin 193-EC electronic overload relay component that is known as the 193-EC1ZZ relay is one of many available protective devices by Allen-Bradley/Rockwell Automation. The unit includes the CE, ABS, CCC, cUL, and C-Tick certifications, and it complies with standards like the CSA C22.2 (No. 14), EN 60947-4-1, and UL 508 standards. The overload relays from the 193-EC series offer programmable trip and warning settings, true RMS current sensing, ambient temperature compensation, LED indicators, compatibility with the DeviceNet network, and node address switches. The 193-EC1ZZ overload relay is an E3 relay variant with capabilities like thermal overload, current monitoring functions, diagnostic functions, stall, jam (overcurrent), ground fault, phase loss, and over-temperature protection.
The 193-EC1ZZ overload relay supports the M5 terminal type and three-pole terminal blocks. The unit is also available with terminal lug kits which are made in a couple of variants. The unit has maximum available fault current of 5000 Amps and maximum voltage of 600 Amps according to the UL standards. The power consumption of the control circuits on the 193-EC1ZZ relay is 3.2 Watts and the rated supply voltage is 24 Volts DC. The operating voltage range of the control circuits is 11 to 25 Volts DC. In regard to the available inputs and outputs, the 193-EC1ZZ overload relay has 2 inputs and a single output. The adjustable current rating of the unit is 9 to 5000 Amps and its contactor is panel mounted. The typical operating frequency of the unit is 20 to 250 Hertz. The E3 relay is a small component with an approximate weight of 0.8 kilograms or 1.7 pounds.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 193-EC1ZZ. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 193-EC1ZZ. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.