DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 193-EC2AD overload relay is manufactured by Allen-Bradley/Rockwell Automation and it is available through the Bulletin 193-EC product line. The unit has four inputs and two outputs, along with an insulation voltage of 690 Volts AC.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 193-EC2AD. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC2AD |
Type | E3 Plus with internal ground fault sensor |
Adjustment rating | 1 to 5 Amps |
Contactor size | C30 to C43 |
Number of inputs | 4 |
Number of outputs | 2 |
Rated insulation voltage | 690 Volts AC |
Rated frequency | 20 to 250 Hertz |
Standards/certifications | CSA C22.2 No. 14, UL 508, UL 1053, CE, cUL, etc. |
Operating temperature | -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) |
Storage temperature | -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) |
Weight | 0.8 kilograms (1.7 pounds) |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC2AD |
Type | E3 Plus with internal ground fault sensor |
Adjustment rating | 1 to 5 Amps |
Contactor size | C30 to C43 |
Number of inputs | 4 |
Number of outputs | 2 |
Rated insulation voltage | 690 Volts AC |
Rated frequency | 20 to 250 Hertz |
Standards/certifications | CSA C22.2 No. 14, UL 508, UL 1053, CE, cUL, etc. |
Operating temperature | -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) |
Storage temperature | -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) |
Weight | 0.8 kilograms (1.7 pounds) |
The electronic output relay unit that is known as the 193-EC2AD relay is an Allen-Bradley/Rockwell Automation component made for professional systems in various industries. The unit meets all the requirements that are set out in all the applicable standards and it includes certifications from the CE, CCC, and C-Tick standards. The unit is part of the Bulletin 193-EC product line and it supports communication through the DeviceNet network. The 193-EC2AD unit has features like underload protection, stall protection, phase loss/ground fault protection, thermal overload protection, and over-temperature protection. The unit includes ground fault protection with an internal current rating of 1 to 5 Amps.
The 193-EC2AD overload relay has maximum available fault current of 5000 Amps and maximum voltage of 600 Volts according to the UL standards. Besides that, the unit has 4 available inputs and 2 available outputs, and a rated insulation voltage of 690 Volts AC. The typical operating frequency is within the range of 20 to 250 Hertz. The 193-EC2AD relay unit features a maximum heat dissipation of 4.53 Watts and a control circuit power consumption rating of 3.9 Watts. The power supply rating of control circuits includes an operating voltage range of 11 to 25 Volts DC and a rated power supply voltage of 24 Volts DC. The control circuits are supplied through a DeviceNet connection. The 193-EC2AD unit features a contactor size of C30 to C43. The unit operates in humidity levels of 5 to 95% (non-condensing) and it tolerates vibrations of up to 3 G along with 30 G of shock. The unit has small dimensions and it weighs only 0.8 kilograms (1.7 pounds).
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $1166 | ![]() |
Our highly skilled technicians can repair your 193-EC2AD. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC2AD |
Type | E3 Plus with internal ground fault sensor |
Adjustment rating | 1 to 5 Amps |
Contactor size | C30 to C43 |
Number of inputs | 4 |
Number of outputs | 2 |
Rated insulation voltage | 690 Volts AC |
Rated frequency | 20 to 250 Hertz |
Standards/certifications | CSA C22.2 No. 14, UL 508, UL 1053, CE, cUL, etc. |
Operating temperature | -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) |
Storage temperature | -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) |
Weight | 0.8 kilograms (1.7 pounds) |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC2AD |
Type | E3 Plus with internal ground fault sensor |
Adjustment rating | 1 to 5 Amps |
Contactor size | C30 to C43 |
Number of inputs | 4 |
Number of outputs | 2 |
Rated insulation voltage | 690 Volts AC |
Rated frequency | 20 to 250 Hertz |
Standards/certifications | CSA C22.2 No. 14, UL 508, UL 1053, CE, cUL, etc. |
Operating temperature | -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) |
Storage temperature | -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) |
Weight | 0.8 kilograms (1.7 pounds) |
The electronic output relay unit that is known as the 193-EC2AD relay is an Allen-Bradley/Rockwell Automation component made for professional systems in various industries. The unit meets all the requirements that are set out in all the applicable standards and it includes certifications from the CE, CCC, and C-Tick standards. The unit is part of the Bulletin 193-EC product line and it supports communication through the DeviceNet network. The 193-EC2AD unit has features like underload protection, stall protection, phase loss/ground fault protection, thermal overload protection, and over-temperature protection. The unit includes ground fault protection with an internal current rating of 1 to 5 Amps.
The 193-EC2AD overload relay has maximum available fault current of 5000 Amps and maximum voltage of 600 Volts according to the UL standards. Besides that, the unit has 4 available inputs and 2 available outputs, and a rated insulation voltage of 690 Volts AC. The typical operating frequency is within the range of 20 to 250 Hertz. The 193-EC2AD relay unit features a maximum heat dissipation of 4.53 Watts and a control circuit power consumption rating of 3.9 Watts. The power supply rating of control circuits includes an operating voltage range of 11 to 25 Volts DC and a rated power supply voltage of 24 Volts DC. The control circuits are supplied through a DeviceNet connection. The 193-EC2AD unit features a contactor size of C30 to C43. The unit operates in humidity levels of 5 to 95% (non-condensing) and it tolerates vibrations of up to 3 G along with 30 G of shock. The unit has small dimensions and it weighs only 0.8 kilograms (1.7 pounds).
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $1166 | ![]() |
Our highly skilled technicians can repair your 193-EC2AD. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $1166 | ![]() |
Our highly skilled technicians can repair your 193-EC2AD. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.