193-EC2CD | Allen Bradley Motors E1 Plus Relays

193-EC2CD

193-EC2CD

Description:

The 193-EC2CD relay is an Allen-Bradley electronic overload relay.  The 193-EC2CD relay supports both 3-phase and single-phase operation.

Rated 4.6 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 193-EC2CD

Add more parts to quote

Description:

The 193-EC2CD relay is an Allen-Bradley electronic overload relay.  The 193-EC2CD relay supports both 3-phase and single-phase operation.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 193-EC2CD.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 7 reviews

    Technical Specifications for 193-EC2CD

BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC2CD
Product typeElectronic overload relay
Ground fault protection1 to 5 Amps
Current rating5 to 25 Amps
Contactor size C30 to C43
NEMA operating voltage600 Volts
IEC operating voltage690 / 1000 Volts
Outputs2
Inputs4
UPC10611320228349
BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC2CD
Product typeElectronic overload relay
Ground fault protection1 to 5 Amps
Current rating5 to 25 Amps
Contactor size C30 to C43
NEMA operating voltage600 Volts
IEC operating voltage690 / 1000 Volts
Outputs2
Inputs4
UPC10611320228349
s

About 193-EC2CD

The Allen-Bradley 193-EC2CD relay is an E3 Plus electronic overload relay which is a solid-state electronic overload relay designed for the protection of squirrel-cage induction motors. It is part of the Bulletin 193 series which provides 0.4 to 5000 Amps rated relays. The 193-EC2CD relay belongs to the Type E3 Plus category which provides 1 to 5 Amps of internal core-balanced ground fault protection. The current rating of the 193-EC2CD relay is 5 to 25 Amps and the size of the Bulletin 100 contactor is C30 to C43. The 193-EC2CD relay is factory programmed for 3-phase operation. The configuration can be changed to 1-phase operation by modifying the 1/3 phase parameter. The rated NEMA operating voltage is 600 Volts and IEC operating voltage is 690 to 1000 Volts.



 



The 193-EC2CD relay is ambient temperature compensated. The relay supports both automatic and manual resetting. There are 2 outputs and 4 inputs on the 193-EC2CD relay. The relay is compatible with variable frequency drives and conforms with the ODVA (DeviceNet). The baud rates supported by DeviceNet include 125, 250, and 500 kbaud. The environmental specifications for the 193-EC2CD relay include a storage temperature range of -40 to 185 degrees Fahrenheit, an operating temperature range of -4 to 131 degrees Fahrenheit, 5 to 95% operating humidity, a 3 G vibration rating, and a 30 G shock rating. The 193-EC2CD relay complies with a Pollution Degree 2 rated environment. The approximate weight of the 193-EC2CD relay is 1.77 kilograms. The 193-EC2CD relay complies with the CSA C22.2, EN 60 947, UL 508, and UL 1053 standards. The relay is also certified by the CE, C-tick, and cUL standards.



Repair Services for 193-EC2CD

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 193-EC2CD. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 193-EC2CD

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 193-EC2CD

Resolutions For 193-EC2CD

About

Technical Specifications for 193-EC2CD

BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC2CD
Product typeElectronic overload relay
Ground fault protection1 to 5 Amps
Current rating5 to 25 Amps
Contactor size C30 to C43
NEMA operating voltage600 Volts
IEC operating voltage690 / 1000 Volts
Outputs2
Inputs4
UPC10611320228349
BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC2CD
Product typeElectronic overload relay
Ground fault protection1 to 5 Amps
Current rating5 to 25 Amps
Contactor size C30 to C43
NEMA operating voltage600 Volts
IEC operating voltage690 / 1000 Volts
Outputs2
Inputs4
UPC10611320228349

About 193-EC2CD

The Allen-Bradley 193-EC2CD relay is an E3 Plus electronic overload relay which is a solid-state electronic overload relay designed for the protection of squirrel-cage induction motors. It is part of the Bulletin 193 series which provides 0.4 to 5000 Amps rated relays. The 193-EC2CD relay belongs to the Type E3 Plus category which provides 1 to 5 Amps of internal core-balanced ground fault protection. The current rating of the 193-EC2CD relay is 5 to 25 Amps and the size of the Bulletin 100 contactor is C30 to C43. The 193-EC2CD relay is factory programmed for 3-phase operation. The configuration can be changed to 1-phase operation by modifying the 1/3 phase parameter. The rated NEMA operating voltage is 600 Volts and IEC operating voltage is 690 to 1000 Volts.



 



The 193-EC2CD relay is ambient temperature compensated. The relay supports both automatic and manual resetting. There are 2 outputs and 4 inputs on the 193-EC2CD relay. The relay is compatible with variable frequency drives and conforms with the ODVA (DeviceNet). The baud rates supported by DeviceNet include 125, 250, and 500 kbaud. The environmental specifications for the 193-EC2CD relay include a storage temperature range of -40 to 185 degrees Fahrenheit, an operating temperature range of -4 to 131 degrees Fahrenheit, 5 to 95% operating humidity, a 3 G vibration rating, and a 30 G shock rating. The 193-EC2CD relay complies with a Pollution Degree 2 rated environment. The approximate weight of the 193-EC2CD relay is 1.77 kilograms. The 193-EC2CD relay complies with the CSA C22.2, EN 60 947, UL 508, and UL 1053 standards. The relay is also certified by the CE, C-tick, and cUL standards.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 193-EC2CD. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 193-EC2CD. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF