DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 193-EC3HG relay module is an Allen-Bradley electronic motor protection. The 193-EC3HG relay module features solid-state relays and a 302 Amps of maximum current.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 193-EC3HG. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC3HG |
minimum Amp Rating | 60 |
Maximum Amp Rating | 302 |
Ground Fault Protection | 20 mA to 5 A |
Communication | DeviceNet |
Memory | Flash memory |
CT Compatibility | CTs with 5 Amps of secondary current |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC3HG |
minimum Amp Rating | 60 |
Maximum Amp Rating | 302 |
Ground Fault Protection | 20 mA to 5 A |
Communication | DeviceNet |
Memory | Flash memory |
CT Compatibility | CTs with 5 Amps of secondary current |
The 193-EC3HG relay module is an Allen-Bradley electronic motor protection relay with 4 inputs and 2 output channels. The Allen-Bradley motor starter overload relay features the solid-state relay style and it has an average current rating of 302 Amps maximum. The minimum current is rated at 60 Amps and the overload relay module is classified under the Bulletin 193 product line. The Allen-Bradley overload relay features a contractor size of 100-D210 to 100-D420. The component also features the external 20 milliamps to 5 Amps rated ground fault protection. The unit features the direct contactor rated 60 to 302 Amps. The 193-EC3HG relay module supports Flash memory.
The 193-EC3HG relay module comes with ground fault protection, which requires the connection of an external core balance current transformer. The use of shielded cable for the PTC thermostat circuit is recommended. This is to assist the device's compliance with the Electromagnetic compatibility requirements. Shielded cable is also recommended for the input circuits. To ensure reliable input signal processing, the manufacturer recommends routing the input wiring in raceways separate from the power cabling. The PTC thermostat cable should be grounded at the E3 Plus overload relay with no connection made to the opposite end. Note that the 193-EC3HG relay module is suitable for the use on circuits that are capable of delivering not more than the RMS symmetrical Amps as indicated by the manufacturer. The 193-EC3HG relay module is intended for use with the CTs with the secondary current rating of 5 Amps. In the case of improper current transformer selection, this results in inaccurate motor operational data.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 193-EC3HG. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC3HG |
minimum Amp Rating | 60 |
Maximum Amp Rating | 302 |
Ground Fault Protection | 20 mA to 5 A |
Communication | DeviceNet |
Memory | Flash memory |
CT Compatibility | CTs with 5 Amps of secondary current |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC3HG |
minimum Amp Rating | 60 |
Maximum Amp Rating | 302 |
Ground Fault Protection | 20 mA to 5 A |
Communication | DeviceNet |
Memory | Flash memory |
CT Compatibility | CTs with 5 Amps of secondary current |
The 193-EC3HG relay module is an Allen-Bradley electronic motor protection relay with 4 inputs and 2 output channels. The Allen-Bradley motor starter overload relay features the solid-state relay style and it has an average current rating of 302 Amps maximum. The minimum current is rated at 60 Amps and the overload relay module is classified under the Bulletin 193 product line. The Allen-Bradley overload relay features a contractor size of 100-D210 to 100-D420. The component also features the external 20 milliamps to 5 Amps rated ground fault protection. The unit features the direct contactor rated 60 to 302 Amps. The 193-EC3HG relay module supports Flash memory.
The 193-EC3HG relay module comes with ground fault protection, which requires the connection of an external core balance current transformer. The use of shielded cable for the PTC thermostat circuit is recommended. This is to assist the device's compliance with the Electromagnetic compatibility requirements. Shielded cable is also recommended for the input circuits. To ensure reliable input signal processing, the manufacturer recommends routing the input wiring in raceways separate from the power cabling. The PTC thermostat cable should be grounded at the E3 Plus overload relay with no connection made to the opposite end. Note that the 193-EC3HG relay module is suitable for the use on circuits that are capable of delivering not more than the RMS symmetrical Amps as indicated by the manufacturer. The 193-EC3HG relay module is intended for use with the CTs with the secondary current rating of 5 Amps. In the case of improper current transformer selection, this results in inaccurate motor operational data.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 193-EC3HG. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 193-EC3HG. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.