DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 193-EC3ZZ relay is an Allen-Bradley overload C3 Plus 9-5000 A external CTS relay. The unit features two outputs and four inputs.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 193-EC3ZZ. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC3ZZ |
Rated Insulation Voltage (Ui ) | 690V AC |
Rated Impulse Strength (Uimp) | 6 kV AC |
Rated Frequency | 20 to 250 Hz |
Ambient operating temperature | -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) |
Ambient Storage Temperature | -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) |
Relative humidity | 5 to 95%, non-condensing |
IP rating | IP 20 |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC3ZZ |
Rated Insulation Voltage (Ui ) | 690V AC |
Rated Impulse Strength (Uimp) | 6 kV AC |
Rated Frequency | 20 to 250 Hz |
Ambient operating temperature | -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) |
Ambient Storage Temperature | -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) |
Relative humidity | 5 to 95%, non-condensing |
IP rating | IP 20 |
Manufactured by Allen-Bradley, the 193-EC3ZZ relay is an E3 Plus protection rated motor protection relay. The protection relay features 4 inputs and 2 output channels. The component comes with the external ground fault current or full load current range of 9 to 5000 Amps, and it is used with the external current transformers. The Allen-Bradley motor protection relay features advanced motor protection capabilities which enable the protection of the users' assets. The 193-EC3ZZ relay is field-configurable to the manual or automatic reset types. The 193-EC3ZZ relay features 3-phase operation and it comes with the option of switching to single-phase operation. Therefore, the component users can easily change the operation phase from 3-phase to single-phase.
With the 193-EC3ZZ relay in the off-state, the trip relay remains in the open state. The trip relay closes after about 35 seconds if power is applied with no trip condition. With the outputs commanded through an explicit message, the users should ensure there is no established I/O connection that is actively controlling the outputs and that the explicit message connection is set to the non-zero expected packet rate. The 193-EC3ZZ relay comes with the DeviceNet functionalities. The supported DeviceNet functionalities include the polled I/O messaging, change-of-state or the cyclic messaging, and the explicit messaging. The 193-EC3ZZ relay comes with the rated insulation voltage of 690 Volts AC. The unit has a rated impulse strength of 6 kilovolts AC, while the rated frequency is 20 to 250 Hertz.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 193-EC3ZZ. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC3ZZ |
Rated Insulation Voltage (Ui ) | 690V AC |
Rated Impulse Strength (Uimp) | 6 kV AC |
Rated Frequency | 20 to 250 Hz |
Ambient operating temperature | -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) |
Ambient Storage Temperature | -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) |
Relative humidity | 5 to 95%, non-condensing |
IP rating | IP 20 |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EC3ZZ |
Rated Insulation Voltage (Ui ) | 690V AC |
Rated Impulse Strength (Uimp) | 6 kV AC |
Rated Frequency | 20 to 250 Hz |
Ambient operating temperature | -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) |
Ambient Storage Temperature | -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) |
Relative humidity | 5 to 95%, non-condensing |
IP rating | IP 20 |
Manufactured by Allen-Bradley, the 193-EC3ZZ relay is an E3 Plus protection rated motor protection relay. The protection relay features 4 inputs and 2 output channels. The component comes with the external ground fault current or full load current range of 9 to 5000 Amps, and it is used with the external current transformers. The Allen-Bradley motor protection relay features advanced motor protection capabilities which enable the protection of the users' assets. The 193-EC3ZZ relay is field-configurable to the manual or automatic reset types. The 193-EC3ZZ relay features 3-phase operation and it comes with the option of switching to single-phase operation. Therefore, the component users can easily change the operation phase from 3-phase to single-phase.
With the 193-EC3ZZ relay in the off-state, the trip relay remains in the open state. The trip relay closes after about 35 seconds if power is applied with no trip condition. With the outputs commanded through an explicit message, the users should ensure there is no established I/O connection that is actively controlling the outputs and that the explicit message connection is set to the non-zero expected packet rate. The 193-EC3ZZ relay comes with the DeviceNet functionalities. The supported DeviceNet functionalities include the polled I/O messaging, change-of-state or the cyclic messaging, and the explicit messaging. The 193-EC3ZZ relay comes with the rated insulation voltage of 690 Volts AC. The unit has a rated impulse strength of 6 kilovolts AC, while the rated frequency is 20 to 250 Hertz.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 193-EC3ZZ. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 193-EC3ZZ. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.