193-EC4AB | Allen Bradley Motors E1 Plus Relays

193-EC4AB

193-EC4AB

Description: The 193-EC4AB E3 Plus electronic overload relay is an overload relay that belongs to the Allen-Bradley Bulletin 193-EC E3 Plus overload relay family and that is designed to provide thermal overload protection to industrial 3-phase motors. The 193-EC4AB relay comes with a thermal memory circuit that stores the thermal profile of the motor even when power is disconnected from the motor, and it initiates a thermal warning that alerts the users in the event of an impending overload trip. read more...
Rated 4.9 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 193-EC4AB

Add more parts to quote

Description: The 193-EC4AB E3 Plus electronic overload relay is an overload relay that belongs to the Allen-Bradley Bulletin 193-EC E3 Plus overload relay family and that is designed to provide thermal overload protection to industrial 3-phase motors. The 193-EC4AB relay comes with a thermal memory circuit that stores the thermal profile of the motor even when power is disconnected from the motor, and it initiates a thermal warning that alerts the users in the event of an impending overload trip. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 193-EC4AB.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 7 reviews

    Technical Specifications for 193-EC4AB

BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC4AB
DescriptionElectronic Current Monitor Relay
Operating Voltage600 Volts AC
Trip Range1.0 to 5.0 Amps
CommunicationDeviceNet (Slave Only)
Inputs4 (24 Volts DC) Current-sinking
Outputs2
External Ground Fault Sensor InputYes
Built-In ProtectionYes
DeviceLogix CapabilityYes
Configuration MethodRSNetWorx For DeviceNet (version 3.0 or later)
BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC4AB
DescriptionElectronic Current Monitor Relay
Operating Voltage600 Volts AC
Trip Range1.0 to 5.0 Amps
CommunicationDeviceNet (Slave Only)
Inputs4 (24 Volts DC) Current-sinking
Outputs2
External Ground Fault Sensor InputYes
Built-In ProtectionYes
DeviceLogix CapabilityYes
Configuration MethodRSNetWorx For DeviceNet (version 3.0 or later)
s

About 193-EC4AB

The 193-EC4AB E3 Plus electronic overload relay is an overload relay that belongs to the Allen-Bradley Bulletin 193-EC E3 Plus overload relay family and that is designed to provide thermal overload protection to industrial 3-phase motors. The 193-EC4AB relay comes with a thermal memory circuit that stores the thermal profile of the motor even when power is disconnected from the motor, and it initiates a thermal warning that alerts the users in the event of an impending overload trip. The 193-EC4AB relay also provides motor over-temperature protection by using an embedded positive temperature coefficient thermistor (PTC), which is programmed to trip when the temperature exceeds the set trip value.



 



The 193-EC4AB E3 Plus overload relay features four 24 Volts DC rated current-sinking inputs for connecting to external devices such as switches and contactors and 2 Form A relay outputs with 250 Volts AC operating voltage and 5 Amps of rated operating current. It comes with an external ground fault sensor input that incorporates “zero-sequence sensing” for high sensitivity ground fault protection. The 193-EC4AB relay has a voltage rating of 600 Volts AC and a trip current range of 1 to 5 Amps. It has a rated impulse strength of 6 kilovolts AC and a UL/CSA rated insulation voltage of 690 Volts AC. The 193-EC4AB relay has the DeviceNet (Slave Only) capability that allows for the uploading and downloading of the device configuration and the DeviceLogix programs, and it can be integrated into the DeviceLogix control environment for enhanced control.

Technical Description of 193-EC4AB

The Allen-Bradley 193-EC4AB E3 Plus electronic current monitor relay with 600 Volts AC maximum operating voltage, and 1.0 to 5.0 Amps adjustable trip current ratings. This relay device has the "Slave Only" DeviceNet communication capability, DeviceLogix capability, and the Current Monitoring capability.

Repair Services for 193-EC4AB

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 193-EC4AB. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 193-EC4AB

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 193-EC4AB

Resolutions For 193-EC4AB

About

Technical Specifications for 193-EC4AB

BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC4AB
DescriptionElectronic Current Monitor Relay
Operating Voltage600 Volts AC
Trip Range1.0 to 5.0 Amps
CommunicationDeviceNet (Slave Only)
Inputs4 (24 Volts DC) Current-sinking
Outputs2
External Ground Fault Sensor InputYes
Built-In ProtectionYes
DeviceLogix CapabilityYes
Configuration MethodRSNetWorx For DeviceNet (version 3.0 or later)
BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC4AB
DescriptionElectronic Current Monitor Relay
Operating Voltage600 Volts AC
Trip Range1.0 to 5.0 Amps
CommunicationDeviceNet (Slave Only)
Inputs4 (24 Volts DC) Current-sinking
Outputs2
External Ground Fault Sensor InputYes
Built-In ProtectionYes
DeviceLogix CapabilityYes
Configuration MethodRSNetWorx For DeviceNet (version 3.0 or later)

About 193-EC4AB

The 193-EC4AB E3 Plus electronic overload relay is an overload relay that belongs to the Allen-Bradley Bulletin 193-EC E3 Plus overload relay family and that is designed to provide thermal overload protection to industrial 3-phase motors. The 193-EC4AB relay comes with a thermal memory circuit that stores the thermal profile of the motor even when power is disconnected from the motor, and it initiates a thermal warning that alerts the users in the event of an impending overload trip. The 193-EC4AB relay also provides motor over-temperature protection by using an embedded positive temperature coefficient thermistor (PTC), which is programmed to trip when the temperature exceeds the set trip value.



 



The 193-EC4AB E3 Plus overload relay features four 24 Volts DC rated current-sinking inputs for connecting to external devices such as switches and contactors and 2 Form A relay outputs with 250 Volts AC operating voltage and 5 Amps of rated operating current. It comes with an external ground fault sensor input that incorporates “zero-sequence sensing” for high sensitivity ground fault protection. The 193-EC4AB relay has a voltage rating of 600 Volts AC and a trip current range of 1 to 5 Amps. It has a rated impulse strength of 6 kilovolts AC and a UL/CSA rated insulation voltage of 690 Volts AC. The 193-EC4AB relay has the DeviceNet (Slave Only) capability that allows for the uploading and downloading of the device configuration and the DeviceLogix programs, and it can be integrated into the DeviceLogix control environment for enhanced control.

Technical Description of 193-EC4AB

The Allen-Bradley 193-EC4AB E3 Plus electronic current monitor relay with 600 Volts AC maximum operating voltage, and 1.0 to 5.0 Amps adjustable trip current ratings. This relay device has the "Slave Only" DeviceNet communication capability, DeviceLogix capability, and the Current Monitoring capability.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 193-EC4AB. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 193-EC4AB. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF