193-EC4ZZ | Allen Bradley Motors E1 Plus Relays

193-EC4ZZ

193-EC4ZZ

Description:

The Allen-Bradley 193-EC4ZZ E3 Plus Electronic Current Monitor Relay comes with 600 Volts AC maximum operating voltage, and 5 to 5,000 Amps of adjustable trip current. This relay device has the "Slave Only" DeviceNet communication capability, DeviceLogix capability, and Current Monitoring capability.

Rated 4.5 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 193-EC4ZZ

Add more parts to quote

Description:

The Allen-Bradley 193-EC4ZZ E3 Plus Electronic Current Monitor Relay comes with 600 Volts AC maximum operating voltage, and 5 to 5,000 Amps of adjustable trip current. This relay device has the "Slave Only" DeviceNet communication capability, DeviceLogix capability, and Current Monitoring capability.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 193-EC4ZZ.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 5 reviews

    Technical Specifications for 193-EC4ZZ

BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC4ZZ
DescriptionE3 Plus Electronic Current Monitor Relay (Panel Mount)
Operating Voltage600 Volts AC
Trip Range5 to 5,000 Amps
CommunicationSlave-Only DeviceNet
Inputs4 Sinking Inputs
Outputs2 Form A Relay Outputs
Ground Fault ProtectionYes
Built-In ProtectionYes
DeviceLogix CapabilityYes
Configuration MethodRSNetWorx For DeviceNet (version 3.0 or later)
Terminal TypeFixed Screw
BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC4ZZ
DescriptionE3 Plus Electronic Current Monitor Relay (Panel Mount)
Operating Voltage600 Volts AC
Trip Range5 to 5,000 Amps
CommunicationSlave-Only DeviceNet
Inputs4 Sinking Inputs
Outputs2 Form A Relay Outputs
Ground Fault ProtectionYes
Built-In ProtectionYes
DeviceLogix CapabilityYes
Configuration MethodRSNetWorx For DeviceNet (version 3.0 or later)
Terminal TypeFixed Screw
s

About 193-EC4ZZ

The 193-EC4ZZ E3 Plus electronic overload relay is an overload relay device from the Allen-Bradley Bulletin 193-EC4 current monitor relay family that is designed to monitor and provide thermal overload protection to connected 3-phase motors. The 193-EC4ZZ relay is suitable for both single-phase and three-phase applications, and it comes with 4 integrated sinking inputs and 2 integrated Form A relay outputs for enhanced I/O choices. The 193-EC4ZZ relay provides robust thermal overload protection by accurately monitoring the current on individual phases (True RMS Sensing) of the connected motor and programming the actual FLA (Full Load Amps) ratings and the desired trip classes of the motor. It has a thermal memory circuit that retains the thermal profile of connected motors, and it also has a thermal warning capability that alerts operators to impending trip conditions.



 



The 193-EC4ZZ relay also offers jam detection, stall protection, under-load protection, current imbalance protection, and ground fault protection as standard protective features. It has DeviceNet communication capability, which supports the “Slave Only” transfer protocol for uploading, editing, storing, and downloading DeviceLogix programs. The 193-EC4ZZ relay offers seamless integration into the Allen-Bradley DeviceLogix control system for control flexibility and enhanced diagnostics. The 193-EC4ZZ relay has a UL rated operating voltage of 600 Volts AC and an adjustable trip current range of 9 to 5,000 Amps. This device has a UL-rated insulation voltage of 600 Volts AC and an impulse withstand rating of 6 kiloVolts AC. The 193-EC4ZZ relay comes with an external ground fault sensor input and a PTC thermistor input, which provides motor over-temperature protection. It comes with fixed screw terminals, and it supports panel mounting.



Repair Services for 193-EC4ZZ

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 193-EC4ZZ. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 193-EC4ZZ

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 193-EC4ZZ

Resolutions For 193-EC4ZZ

About

Technical Specifications for 193-EC4ZZ

BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC4ZZ
DescriptionE3 Plus Electronic Current Monitor Relay (Panel Mount)
Operating Voltage600 Volts AC
Trip Range5 to 5,000 Amps
CommunicationSlave-Only DeviceNet
Inputs4 Sinking Inputs
Outputs2 Form A Relay Outputs
Ground Fault ProtectionYes
Built-In ProtectionYes
DeviceLogix CapabilityYes
Configuration MethodRSNetWorx For DeviceNet (version 3.0 or later)
Terminal TypeFixed Screw
BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC4ZZ
DescriptionE3 Plus Electronic Current Monitor Relay (Panel Mount)
Operating Voltage600 Volts AC
Trip Range5 to 5,000 Amps
CommunicationSlave-Only DeviceNet
Inputs4 Sinking Inputs
Outputs2 Form A Relay Outputs
Ground Fault ProtectionYes
Built-In ProtectionYes
DeviceLogix CapabilityYes
Configuration MethodRSNetWorx For DeviceNet (version 3.0 or later)
Terminal TypeFixed Screw

About 193-EC4ZZ

The 193-EC4ZZ E3 Plus electronic overload relay is an overload relay device from the Allen-Bradley Bulletin 193-EC4 current monitor relay family that is designed to monitor and provide thermal overload protection to connected 3-phase motors. The 193-EC4ZZ relay is suitable for both single-phase and three-phase applications, and it comes with 4 integrated sinking inputs and 2 integrated Form A relay outputs for enhanced I/O choices. The 193-EC4ZZ relay provides robust thermal overload protection by accurately monitoring the current on individual phases (True RMS Sensing) of the connected motor and programming the actual FLA (Full Load Amps) ratings and the desired trip classes of the motor. It has a thermal memory circuit that retains the thermal profile of connected motors, and it also has a thermal warning capability that alerts operators to impending trip conditions.



 



The 193-EC4ZZ relay also offers jam detection, stall protection, under-load protection, current imbalance protection, and ground fault protection as standard protective features. It has DeviceNet communication capability, which supports the “Slave Only” transfer protocol for uploading, editing, storing, and downloading DeviceLogix programs. The 193-EC4ZZ relay offers seamless integration into the Allen-Bradley DeviceLogix control system for control flexibility and enhanced diagnostics. The 193-EC4ZZ relay has a UL rated operating voltage of 600 Volts AC and an adjustable trip current range of 9 to 5,000 Amps. This device has a UL-rated insulation voltage of 600 Volts AC and an impulse withstand rating of 6 kiloVolts AC. The 193-EC4ZZ relay comes with an external ground fault sensor input and a PTC thermistor input, which provides motor over-temperature protection. It comes with fixed screw terminals, and it supports panel mounting.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 193-EC4ZZ. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 193-EC4ZZ. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF