193-EC5EE

The 193-EC5EE is an electronic overload relay module from Allen-Bradley. This module is a panel-mounted device that is combined with the bulletin 150 contactors specifically, size C60 - C85 contactor. It has a current adjustment range of 18-90 Amperes and comes with integrated voltage monitoring capability. The 193-EC5EE also features DeviceNet communication which permits monitoring of a variety of parameters over the communication protocol. Specific parameters include individual phase currents in amperes; Individual phase currents read as a percentage of motor Full Load Current (FLA); Average current measured in amperes; Average current as a percentage of motor FLA; Percentage utilization of thermal capacity; Percentage of Current imbalance; Ground fault current monitoring. Integrated diagnostic capability of the 193-EC5EE that can be also monitored over DeviceNet network are Device status; Past Five (5) trips history; Trip status; Positive warnings history; Warning status; Runtime hours; Time to an overload trip; Number of starts; Time to reset after an overload trip and Trip snapshot. Local LED status indicators available to this module are Network status, Trip / Warning status; Out A & B, and In 1-4 status. This overload relay also comes with integrated input and output channels as well as Test and Rest buttons. With DeviceNet communication also, the 193-EC5EE, single logic routines may be programmed and downloaded to this device. Supported instructions by the 193-EC5EE are standard Boolean operators (e.g., AND, OR, XOR, and NOT) plus timers, counters, and latches.

The 193-EC5EE electronic voltage monitor relay from the Allen-Bradley Bulletin 193-EC electronic overload relay family that is designed to provide both voltage and current overload protection to connected 3-phase industrial motors. The 193-EC5EE relay offers DeviceNet capabilities that allow the operators to configure, edit, enable, monitor, or delete DeviceLogix programs. It also comes with a built-in DeviceNet communication capability that supports the Slave Only data transfer and allows for simplified diagnostics and troubleshooting. The 193-EC5EE relay has a DeviceLogix capability and it can be integrated into the DeviceLogix control system for flexible control. This device also supports EtherNet/IP communication by using the EtherNet/IP communication auxiliary device (the 193-DNENCAT unit), which allows for seamless communicating on the EtherNet/IP network without the RSNetWorx network configuration. This feature allows the users to view and configure parameters in real-time by using text files via the internal web page and to automatically replace relay devices without reconfiguring new parameters. The Allen-Bradley 193-EC5EE electronic voltage monitor relay supports single-phase and 3-phase applications via a programming parameter that allows for an easy switch between applications. In addition to the current monitoring and thermal overload protection capabilities, the 193-EC5EE relay also offers a voltage monitoring capability, and it also protects against voltage-related issues. It has a trip class current range of 18 to 90 Amps and it is suitable for circuits with 600 Volts AC maximum operating voltage. The 193-EC5EE relay has 6 current-sinking inputs (rated at 24 Volts DC) and 2 relay outputs, and it also comes with a high-level external ground fault sensor input. The 193-EC5EE relay offers 2-speed motor protection, power protection, and motor energy consumption protection for a better power management system.