193-EC5GF | Allen Bradley Motors E1 Plus Relays

193-EC5GF

193-EC5GF

Description: The Allen-Bradley 193-EC5GF electronic voltage monitor relay is a directly mounted voltage monitor relay that is designed to monitor and protect connected 3-phase motors from voltage-related problems in critical industrial applications. The 193-EC5GF relay is suitable for both single-phase and 3-phase applications, and this option is readily available via a programming parameter. It supports the “Slave Only” DeviceNet connection, and it offers enhanced control with the DeviceLogix control capabilities. By using the RSNetWorx for DeviceNet (Version 3.0 or later), the users can configure, program, enable, monitor, edit, or delete DeviceLogix programs and they can also download them directly to the relay device. read more...
Rated 4.5 with 10 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 193-EC5GF

Add more parts to quote

Description: The Allen-Bradley 193-EC5GF electronic voltage monitor relay is a directly mounted voltage monitor relay that is designed to monitor and protect connected 3-phase motors from voltage-related problems in critical industrial applications. The 193-EC5GF relay is suitable for both single-phase and 3-phase applications, and this option is readily available via a programming parameter. It supports the “Slave Only” DeviceNet connection, and it offers enhanced control with the DeviceLogix control capabilities. By using the RSNetWorx for DeviceNet (Version 3.0 or later), the users can configure, program, enable, monitor, edit, or delete DeviceLogix programs and they can also download them directly to the relay device. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 193-EC5GF.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 10 reviews

    Technical Specifications for 193-EC5GF

BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC5GF
DescriptionElectronic Voltage Monitor Relay
Operating Voltage600 Volts DC
Trip Range42 to 210 Amps
CommunicationDeviceNet
Inputs6 (24 Volts DC)
Outputs2
External Ground Fault Sensor InputYes
Built-In ProtectionYes
DeviceLogix CapabilityYes
Configuration MethodRSNetWorx For DeviceNet (version 3.0 or later)
BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC5GF
DescriptionElectronic Voltage Monitor Relay
Operating Voltage600 Volts DC
Trip Range42 to 210 Amps
CommunicationDeviceNet
Inputs6 (24 Volts DC)
Outputs2
External Ground Fault Sensor InputYes
Built-In ProtectionYes
DeviceLogix CapabilityYes
Configuration MethodRSNetWorx For DeviceNet (version 3.0 or later)
s

About 193-EC5GF

The Allen-Bradley 193-EC5GF electronic voltage monitor relay is a directly mounted voltage monitor relay that is designed to monitor and protect connected 3-phase motors from voltage-related problems in critical industrial applications. The 193-EC5GF relay is suitable for both single-phase and 3-phase applications, and this option is readily available via a programming parameter. It supports the “Slave Only” DeviceNet connection, and it offers enhanced control with the DeviceLogix control capabilities. By using the RSNetWorx for DeviceNet (Version 3.0 or later), the users can configure, program, enable, monitor, edit, or delete DeviceLogix programs and they can also download them directly to the relay device. The operators can also monitor the diagnostic functions (trip status, device status, and warning status) over the DeviceNet network, thus making troubleshooting easy.



 



The 193-EC5GF relay offers other protective features like thermal overload protection, stall protection, jam detection voltage protection, power protection, energy consumption protection, and 2-speed motor protection. The 193-EC5GF relay has 6 current-sinking (24 Volts DC rated) inputs that allow for the connection of external devices such as pilot devices, contactors, and auxiliary contacts, limit switches, and float switches. It also has 2 relay outputs and an external ground fault sensor input that incorporates zero-sequence sensing for high-level ground fault detection and protection. It has an operating voltage rating of 600 Volts AC and a maximum insulation rating of 690 Volts AC (UL). The 193-EC5GF relay comes with a standard screw-type terminal, and it supports direct mounting.

Technical Description of 193-EC5GF

The Allen-Bradley 193-EC5GF E3 Plus electronic voltage monitor relay comes with 600 Volts AC maximum operating voltage, and 42 to 210 Amps of adjustable trip current ratings. This relay device has the "Slave Only" DeviceNet communication capability, the DeviceLogix capability, and the Current Monitoring capability.

Repair Services for 193-EC5GF

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 193-EC5GF. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 193-EC5GF

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 193-EC5GF

Resolutions For 193-EC5GF

About

Technical Specifications for 193-EC5GF

BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC5GF
DescriptionElectronic Voltage Monitor Relay
Operating Voltage600 Volts DC
Trip Range42 to 210 Amps
CommunicationDeviceNet
Inputs6 (24 Volts DC)
Outputs2
External Ground Fault Sensor InputYes
Built-In ProtectionYes
DeviceLogix CapabilityYes
Configuration MethodRSNetWorx For DeviceNet (version 3.0 or later)
BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-EC5GF
DescriptionElectronic Voltage Monitor Relay
Operating Voltage600 Volts DC
Trip Range42 to 210 Amps
CommunicationDeviceNet
Inputs6 (24 Volts DC)
Outputs2
External Ground Fault Sensor InputYes
Built-In ProtectionYes
DeviceLogix CapabilityYes
Configuration MethodRSNetWorx For DeviceNet (version 3.0 or later)

About 193-EC5GF

The Allen-Bradley 193-EC5GF electronic voltage monitor relay is a directly mounted voltage monitor relay that is designed to monitor and protect connected 3-phase motors from voltage-related problems in critical industrial applications. The 193-EC5GF relay is suitable for both single-phase and 3-phase applications, and this option is readily available via a programming parameter. It supports the “Slave Only” DeviceNet connection, and it offers enhanced control with the DeviceLogix control capabilities. By using the RSNetWorx for DeviceNet (Version 3.0 or later), the users can configure, program, enable, monitor, edit, or delete DeviceLogix programs and they can also download them directly to the relay device. The operators can also monitor the diagnostic functions (trip status, device status, and warning status) over the DeviceNet network, thus making troubleshooting easy.



 



The 193-EC5GF relay offers other protective features like thermal overload protection, stall protection, jam detection voltage protection, power protection, energy consumption protection, and 2-speed motor protection. The 193-EC5GF relay has 6 current-sinking (24 Volts DC rated) inputs that allow for the connection of external devices such as pilot devices, contactors, and auxiliary contacts, limit switches, and float switches. It also has 2 relay outputs and an external ground fault sensor input that incorporates zero-sequence sensing for high-level ground fault detection and protection. It has an operating voltage rating of 600 Volts AC and a maximum insulation rating of 690 Volts AC (UL). The 193-EC5GF relay comes with a standard screw-type terminal, and it supports direct mounting.

Technical Description of 193-EC5GF

The Allen-Bradley 193-EC5GF E3 Plus electronic voltage monitor relay comes with 600 Volts AC maximum operating voltage, and 42 to 210 Amps of adjustable trip current ratings. This relay device has the "Slave Only" DeviceNet communication capability, the DeviceLogix capability, and the Current Monitoring capability.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 193-EC5GF. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 193-EC5GF. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF