Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley E1 Plus Relays 193-ED1DB

Product image is representative; revision or series may vary. Contact us to request a specific version.

193-ED1DB

|
Need a Specific Revision?

The Allen Bradley 193-ED1DB is a solid-state overload unit within the E1 Plus Relays series meant for advanced motor control protection. It supports an adjustable current span from 3.2 A to 16 A, making it suitable for various applications as it can handle motor power ranging from 1.5 kW to 7.5 kW.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 193-ED1DB

ManufacturerAllen Bradley
Product TypeSolid-state overload unit
Product LineE1 Plus Relays
Part Number193-ED1DB
Weight0.56 lbs (0.26 kg)
UPC781180127991
Minimum Trip Current3.2 A
Maximum Trip Current16 A
Adjustable Current Span3.2–16 A
Adjustment Ratio5:1
Usable Motor Power1.5–7.5 kW
Auxiliary Outputs1 NC + 1 NO
Phase-loss Sensing~3 s
Ingress ProtectionIP20
Max Operating Voltage690 V AC
Reset ModeManual
Thermal Response ClassClass 10
Low-level Signal Capability17 V / 5 mA
Request a Repair

The 193-ED1DB from Allen Bradley is a solid-state overload unit designed for effective protection of motor applications. This unit fits within the E1 Plus Relays series and is specifically targeted towards maintaining motor safety. The trip current can be adjusted between 3.2 A and 16 A to fit specific operational needs, with an adjustment ratio set at 5:1. Rated for use with motors between 1.5 kW and 7.5 kW, this unit ensures that motors remain within safe operational parameters.

This overload unit also features both one normally closed (NC) and one normally open (NO) auxiliary output, enhancing its utility within automated control systems. In terms of resilience, the device includes phase-loss sensing with a response time of approximately 3 seconds, helping to detect issues that could lead to motor failure. It is designed to operate at a maximum voltage of 690 V AC, broadening its potential applications in differing voltage environments.

Ingress protection for the 193-ED1DB is rated at IP20, implying it is suitable for indoor use where protection from direct contact is necessary. The unit requires a manual reset after tripping, enabling straightforward maintenance procedures. With a thermal response class of Class 10, it ensures that the unit reacts appropriately to thermal conditions. Additionally, the low-level signal capability of 17 V at 5 mA enhances its compatibility with diverse control situations.