DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 193-EEHF electronic overload relay is manufactured by Allen-Bradley/Rockwell Automation and it belongs to the E1 Plus overload relay series. This is a 3-phase unit with a selectable trip class and a current range of 30 to 150 Amps.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 193-EEHF. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EEHF |
Bulletin | 193-E1 Plus |
Phase | 3 |
Current Range | 30 to 150 A |
Trip Class | Adjustable |
Contactor Size | Bulletin 100 D115 to D180 |
Reset Options | Auto-Manual/Manual |
Operating Voltage | 1000/600 V AC |
Frequency | 50 to 60 Hertz |
Rated Impulse Strength | 6 kV AC |
Min Rated Insulation Voltage | 600 V AC |
Max Rated Insulation Voltage | 1000 V AC |
Hexagon Socket Size | 8 mm |
Contact Reliability | 17 V, 5 mA |
UPC | 10781180022262 |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EEHF |
Bulletin | 193-E1 Plus |
Phase | 3 |
Current Range | 30 to 150 A |
Trip Class | Adjustable |
Contactor Size | Bulletin 100 D115 to D180 |
Reset Options | Auto-Manual/Manual |
Operating Voltage | 1000/600 V AC |
Frequency | 50 to 60 Hertz |
Rated Impulse Strength | 6 kV AC |
Min Rated Insulation Voltage | 600 V AC |
Max Rated Insulation Voltage | 1000 V AC |
Hexagon Socket Size | 8 mm |
Contact Reliability | 17 V, 5 mA |
UPC | 10781180022262 |
The 193-EEHF electronic overload relay is manufactured by Allen-Bradley/Rockwell Automation as part of the E1 Plus overload relay product line. It is an IEC 3-phase unit with a selectable trip class with a current range of 30 to 150 Amps. It is specially designed and intended for use with the Bulletin 100 IEC contactor sizes D115 to D180. The 193-EEHF electronic overload relay comes with a selectable trip class of 10, 15, 20, or 30 Amps. It has selectable auto-manual and manual reset options as well as screw type control terminals. This unit has a rated operating frequency of 50 to 60 Hertz, a rated operating voltage of 1000 Volts AC or 600 Volts AC, a rated impulse strength of 6 kilovolts AC, and a rated insulation voltage of 1000 Volts AC. Other features include a coarse-stranded/solid single-conductor torque of 16 to 150 millimeter squared, 28 N-m, and a stranded solid single-conductor torque of 6 to 300 MCM, 250 pounds on an inch.
The Allen-Bradley 193-EEHF overload relay features a hexagon socket size of 8 millimeters. Other specifications of the 193-EEHF overload relay control circuits include a rating designation of B600 and 1 normally open and 1 normally closed circuit. It also features a single-conductor torque rating of 0.5 to 2.5 millimeters squared, 0.55 N-m for flexible-stranded cable. This unit also features control circuits with a wide range of convenient features including a rated insulation voltage of 690 Volts AC. It also has a rated impulse strength of 6 kilovolts AC, an IEC rated operating voltage of 60 Volts AC, and UL rated operating voltage of 600 Volts AC. This overload relay unit comes with contact reliability rating of 17 Volts and 5 milliamps, as well as a thermal current rating of 5 Amps.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 193-EEHF. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EEHF |
Bulletin | 193-E1 Plus |
Phase | 3 |
Current Range | 30 to 150 A |
Trip Class | Adjustable |
Contactor Size | Bulletin 100 D115 to D180 |
Reset Options | Auto-Manual/Manual |
Operating Voltage | 1000/600 V AC |
Frequency | 50 to 60 Hertz |
Rated Impulse Strength | 6 kV AC |
Min Rated Insulation Voltage | 600 V AC |
Max Rated Insulation Voltage | 1000 V AC |
Hexagon Socket Size | 8 mm |
Contact Reliability | 17 V, 5 mA |
UPC | 10781180022262 |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EEHF |
Bulletin | 193-E1 Plus |
Phase | 3 |
Current Range | 30 to 150 A |
Trip Class | Adjustable |
Contactor Size | Bulletin 100 D115 to D180 |
Reset Options | Auto-Manual/Manual |
Operating Voltage | 1000/600 V AC |
Frequency | 50 to 60 Hertz |
Rated Impulse Strength | 6 kV AC |
Min Rated Insulation Voltage | 600 V AC |
Max Rated Insulation Voltage | 1000 V AC |
Hexagon Socket Size | 8 mm |
Contact Reliability | 17 V, 5 mA |
UPC | 10781180022262 |
The 193-EEHF electronic overload relay is manufactured by Allen-Bradley/Rockwell Automation as part of the E1 Plus overload relay product line. It is an IEC 3-phase unit with a selectable trip class with a current range of 30 to 150 Amps. It is specially designed and intended for use with the Bulletin 100 IEC contactor sizes D115 to D180. The 193-EEHF electronic overload relay comes with a selectable trip class of 10, 15, 20, or 30 Amps. It has selectable auto-manual and manual reset options as well as screw type control terminals. This unit has a rated operating frequency of 50 to 60 Hertz, a rated operating voltage of 1000 Volts AC or 600 Volts AC, a rated impulse strength of 6 kilovolts AC, and a rated insulation voltage of 1000 Volts AC. Other features include a coarse-stranded/solid single-conductor torque of 16 to 150 millimeter squared, 28 N-m, and a stranded solid single-conductor torque of 6 to 300 MCM, 250 pounds on an inch.
The Allen-Bradley 193-EEHF overload relay features a hexagon socket size of 8 millimeters. Other specifications of the 193-EEHF overload relay control circuits include a rating designation of B600 and 1 normally open and 1 normally closed circuit. It also features a single-conductor torque rating of 0.5 to 2.5 millimeters squared, 0.55 N-m for flexible-stranded cable. This unit also features control circuits with a wide range of convenient features including a rated insulation voltage of 690 Volts AC. It also has a rated impulse strength of 6 kilovolts AC, an IEC rated operating voltage of 60 Volts AC, and UL rated operating voltage of 600 Volts AC. This overload relay unit comes with contact reliability rating of 17 Volts and 5 milliamps, as well as a thermal current rating of 5 Amps.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 193-EEHF. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 193-EEHF. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.