DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 193-EF2AKP MCS Plus solid-state overload relay is manufactured as part of the 193-EF MCS overload relay series. This is an advanced-version overload relay, and it operates on a current adjustment range of 20 to 180 Amps.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 193-EF2AKP. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EF2AKP |
Bulletin | 193-EF MCS Plus |
Version | Advanced |
Current Adjustment Range | 20 to 180 A |
Control Voltage | 120V AC |
Frequency | 50 to 60 Hertz |
Mounting | Screw Fixing or Snap-on Fixing to Standard DIN-Rail |
Mounting Style | Pass-thru |
Ambient Operating Temperature | -5 to 60 degrees Celsius |
Storage Temperature | -50 to 60 degrees Celsius |
Continuous Thermal Current | 4 A |
Compliance | IEC, CSA, UL, and EN 60947 |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EF2AKP |
Bulletin | 193-EF MCS Plus |
Version | Advanced |
Current Adjustment Range | 20 to 180 A |
Control Voltage | 120V AC |
Frequency | 50 to 60 Hertz |
Mounting | Screw Fixing or Snap-on Fixing to Standard DIN-Rail |
Mounting Style | Pass-thru |
Ambient Operating Temperature | -5 to 60 degrees Celsius |
Storage Temperature | -50 to 60 degrees Celsius |
Continuous Thermal Current | 4 A |
Compliance | IEC, CSA, UL, and EN 60947 |
The Allen-Bradley 193-EF2AKP solid-state overload relay is a product of Allen-Bradley/Rockwell Automation that is manufactured as part of the Bulletin 193-EF solid-state overload relay product series. It is an advanced version relay device that operates in a current adjustment range of 20 to 180 Amps and it supports the pass-thru mounting style. It runs on a control voltage rating of 120 Volts AC at a frequency of 50 to 60 Hertz. Unlike other overload relays, the 193-EF2AKP relay does not come with factory modifications for automatic resetting, remote resetting, or external indication. This unit supports screw fixing or snap-on fixing to standard DIN Rail surface mounting bases. Also, it requires the 193-HD device to set the motor rated current at 0.5 to 20 Amps with the motor supply cables wound around the current transformer to double the rated motor current.
The Allen-Bradley 193-EF2AKP solid-state overload relay operates at an ambient temperature range of -5 to 60 degrees Celsius. When it is not in use, it can be stored in a temperature range between -50 and 60 degrees Celsius. It has a continuous thermal current rating of 4 Amps and a 10 Amps or 16 Amps rated Type G device protection fuse. Also, the 193-EF2AKP overload relay is approved and listed for compliance with the IEC, CSA, UL, and EN 60947 standards. It weighs approximately 1,090 grams and comes with a maximum of 6 PTC sensors per the IEC 34-11-2 standards. This unit has both manual and automatic reset options. The manual reset button resets all the protection functions, while the automatic resetting of the thermistor over-temperature and thermal overload protection function is optional. All the protection functions of this device can only be reset manually.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 193-EF2AKP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EF2AKP |
Bulletin | 193-EF MCS Plus |
Version | Advanced |
Current Adjustment Range | 20 to 180 A |
Control Voltage | 120V AC |
Frequency | 50 to 60 Hertz |
Mounting | Screw Fixing or Snap-on Fixing to Standard DIN-Rail |
Mounting Style | Pass-thru |
Ambient Operating Temperature | -5 to 60 degrees Celsius |
Storage Temperature | -50 to 60 degrees Celsius |
Continuous Thermal Current | 4 A |
Compliance | IEC, CSA, UL, and EN 60947 |
Brand | Allen-Bradley / Rockwell Automation |
Series | E1 Plus Relays |
Part Number | 193-EF2AKP |
Bulletin | 193-EF MCS Plus |
Version | Advanced |
Current Adjustment Range | 20 to 180 A |
Control Voltage | 120V AC |
Frequency | 50 to 60 Hertz |
Mounting | Screw Fixing or Snap-on Fixing to Standard DIN-Rail |
Mounting Style | Pass-thru |
Ambient Operating Temperature | -5 to 60 degrees Celsius |
Storage Temperature | -50 to 60 degrees Celsius |
Continuous Thermal Current | 4 A |
Compliance | IEC, CSA, UL, and EN 60947 |
The Allen-Bradley 193-EF2AKP solid-state overload relay is a product of Allen-Bradley/Rockwell Automation that is manufactured as part of the Bulletin 193-EF solid-state overload relay product series. It is an advanced version relay device that operates in a current adjustment range of 20 to 180 Amps and it supports the pass-thru mounting style. It runs on a control voltage rating of 120 Volts AC at a frequency of 50 to 60 Hertz. Unlike other overload relays, the 193-EF2AKP relay does not come with factory modifications for automatic resetting, remote resetting, or external indication. This unit supports screw fixing or snap-on fixing to standard DIN Rail surface mounting bases. Also, it requires the 193-HD device to set the motor rated current at 0.5 to 20 Amps with the motor supply cables wound around the current transformer to double the rated motor current.
The Allen-Bradley 193-EF2AKP solid-state overload relay operates at an ambient temperature range of -5 to 60 degrees Celsius. When it is not in use, it can be stored in a temperature range between -50 and 60 degrees Celsius. It has a continuous thermal current rating of 4 Amps and a 10 Amps or 16 Amps rated Type G device protection fuse. Also, the 193-EF2AKP overload relay is approved and listed for compliance with the IEC, CSA, UL, and EN 60947 standards. It weighs approximately 1,090 grams and comes with a maximum of 6 PTC sensors per the IEC 34-11-2 standards. This unit has both manual and automatic reset options. The manual reset button resets all the protection functions, while the automatic resetting of the thermistor over-temperature and thermal overload protection function is optional. All the protection functions of this device can only be reset manually.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 193-EF2AKP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 193-EF2AKP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.