193-NREC1ZZ | Allen Bradley Motors E1 Plus Relays

193-NREC1ZZ

193-NREC1ZZ

Description:

The Allen-Bradley 193-NREC1ZZ E3 replacement relay is manufactured by Allen-Bradley/Rockwell Automation and it belongs to the E3 overload relay series. This replacement relay is designed and intended for use with the 193-EC1-H,193-EC1-F, 193-EC1-G, 592-EC1-E, 592-EC1-F, and the 592-EC1-G devices.

Rated 4.6 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 193-NREC1ZZ

Add more parts to quote

Description:

The Allen-Bradley 193-NREC1ZZ E3 replacement relay is manufactured by Allen-Bradley/Rockwell Automation and it belongs to the E3 overload relay series. This replacement relay is designed and intended for use with the 193-EC1-H,193-EC1-F, 193-EC1-G, 592-EC1-E, 592-EC1-F, and the 592-EC1-G devices.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 193-NREC1ZZ.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 13 reviews

    Technical Specifications for 193-NREC1ZZ

BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-NREC1ZZ
Module TypeE3 Replacement Relay
Bulletin193-E3
Compatible with193-EC1-F, 193-EC1-H, 193-EC1-G, 592-EC1-F, 592-EC1-E, and 592-EC1-G
Current Rating0.4 to 5000 A
Versions EC1, EC2, EC3, EC5, E3 model &E3 Plus
Ambient Storage Temperature-40 to 85 degrees Celsius
Non-condensing Relative Humidity 0 to 95 Percent
CautionCorrosive
Storage LocationClean and Dry
Overload TypeMicroprocessor-based
ProtectionSquirrel-Cage/Ground Fault
BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-NREC1ZZ
Module TypeE3 Replacement Relay
Bulletin193-E3
Compatible with193-EC1-F, 193-EC1-H, 193-EC1-G, 592-EC1-F, 592-EC1-E, and 592-EC1-G
Current Rating0.4 to 5000 A
Versions EC1, EC2, EC3, EC5, E3 model &E3 Plus
Ambient Storage Temperature-40 to 85 degrees Celsius
Non-condensing Relative Humidity 0 to 95 Percent
CautionCorrosive
Storage LocationClean and Dry
Overload TypeMicroprocessor-based
ProtectionSquirrel-Cage/Ground Fault
s

About 193-NREC1ZZ

The 193-NREC1ZZ relay is an E3 replacement relay manufactured by Allen-Bradley/Rockwell Automation as part of the E3 overload relay product line. The 193-NREC1ZZ replacement relay is specially designed and intended for use with the 193-EC1-F, 193-EC1-H, 193-EC1-G, 592-EC1-F, 592-EC1-E, and the 592-EC1-G devices. The E3 overload relays, including the 193-NREC1ZZ replacement relay, are multi-functional solid-state microprocessor-based electronic overload relays that are designed to offer protection to squirrel-cage induction motors with ratings from 0.4 to 5000 Amps. The overload relays in this series are available in multiple different versions, including the EC1, EC2, EC3, EC5, E3, and E3 Plus models. The E3 overload relay must remain in its shipping container before it is installed. If the device will not be used for some time, it must be kept in a clean and dry location to maintain its warranty coverage.



 



The Allen-Bradley 193-NREC1ZZ replacement relay has an ambient storage temperature range of -40 to 85 degrees Celsius or -40 to 185 degrees Fahrenheit. It should be stored in an area with non-condensing relative humidity ranging from 0 to 95 percent. It is also essential to take several precautions when handling the 193-NREC1ZZ relay or any other related devices. Do not keep the device in a place where it will be exposed to a corrosive atmosphere and also do not store it in a construction area. The Bulletin 193-EC3 and E3 Plus overload relays are specially designed to offer ground fault protection when used with a separate 193-CBCT core balance ground fault sensor, which is mounted separately from the E3 Plus overload relay. The sensor must also be placed within 3 meters of the E3 plus overload relay.



Repair Services for 193-NREC1ZZ

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 193-NREC1ZZ. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 193-NREC1ZZ

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 193-NREC1ZZ

Resolutions For 193-NREC1ZZ

About

Technical Specifications for 193-NREC1ZZ

BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-NREC1ZZ
Module TypeE3 Replacement Relay
Bulletin193-E3
Compatible with193-EC1-F, 193-EC1-H, 193-EC1-G, 592-EC1-F, 592-EC1-E, and 592-EC1-G
Current Rating0.4 to 5000 A
Versions EC1, EC2, EC3, EC5, E3 model &E3 Plus
Ambient Storage Temperature-40 to 85 degrees Celsius
Non-condensing Relative Humidity 0 to 95 Percent
CautionCorrosive
Storage LocationClean and Dry
Overload TypeMicroprocessor-based
ProtectionSquirrel-Cage/Ground Fault
BrandAllen-Bradley / Rockwell Automation
SeriesE1 Plus Relays
Part Number193-NREC1ZZ
Module TypeE3 Replacement Relay
Bulletin193-E3
Compatible with193-EC1-F, 193-EC1-H, 193-EC1-G, 592-EC1-F, 592-EC1-E, and 592-EC1-G
Current Rating0.4 to 5000 A
Versions EC1, EC2, EC3, EC5, E3 model &E3 Plus
Ambient Storage Temperature-40 to 85 degrees Celsius
Non-condensing Relative Humidity 0 to 95 Percent
CautionCorrosive
Storage LocationClean and Dry
Overload TypeMicroprocessor-based
ProtectionSquirrel-Cage/Ground Fault

About 193-NREC1ZZ

The 193-NREC1ZZ relay is an E3 replacement relay manufactured by Allen-Bradley/Rockwell Automation as part of the E3 overload relay product line. The 193-NREC1ZZ replacement relay is specially designed and intended for use with the 193-EC1-F, 193-EC1-H, 193-EC1-G, 592-EC1-F, 592-EC1-E, and the 592-EC1-G devices. The E3 overload relays, including the 193-NREC1ZZ replacement relay, are multi-functional solid-state microprocessor-based electronic overload relays that are designed to offer protection to squirrel-cage induction motors with ratings from 0.4 to 5000 Amps. The overload relays in this series are available in multiple different versions, including the EC1, EC2, EC3, EC5, E3, and E3 Plus models. The E3 overload relay must remain in its shipping container before it is installed. If the device will not be used for some time, it must be kept in a clean and dry location to maintain its warranty coverage.



 



The Allen-Bradley 193-NREC1ZZ replacement relay has an ambient storage temperature range of -40 to 85 degrees Celsius or -40 to 185 degrees Fahrenheit. It should be stored in an area with non-condensing relative humidity ranging from 0 to 95 percent. It is also essential to take several precautions when handling the 193-NREC1ZZ relay or any other related devices. Do not keep the device in a place where it will be exposed to a corrosive atmosphere and also do not store it in a construction area. The Bulletin 193-EC3 and E3 Plus overload relays are specially designed to offer ground fault protection when used with a separate 193-CBCT core balance ground fault sensor, which is mounted separately from the E3 Plus overload relay. The sensor must also be placed within 3 meters of the E3 plus overload relay.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 193-NREC1ZZ. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 193-NREC1ZZ. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF