H-6200-Q-H00AA

The Allen-Bradley H-6200-Q-H00AA is a servo motor that is a 6200 model and it has a frictional torque of 2.1 pounds on an inch.  The maximum operating speed for the motor is 3000 RPM. The motor has an approximate weight of 27 kilograms. It has 8 poles and 0.31 degrees Celsius per watt of thermal resistance rating. The H-6200-Q-H00AA motor is made to be operated at an ambient temperature that is specified in the manual and the humidity should be non-condensing between 5 and 95% in the place where the motor is operated. The motor is installed with an encoder which has a line count of 2000 lines and a standard configuration with a standard flange which is factory-designated.

The H-6200-Q-H00AA motor must be used in a normal industrial environment and in an environment which is not exposed to a corrosive atmosphere. Users should perform the installation in accordance with the procedure supplied by the manufacturer to ensure the safety of the equipment. Make sure the motors are mounted securely before trying to run the motors and make sure the connections are made as per the instructions. Users must comply with all the local regulations and use safety equipment to prevent any electromagnetic interference because it may affect the performance of the motor. Maintenance must be performed by people who are trained on the system and familiar with the system. If users need any further assistance, they can contact the local supplier or the manufacturer for further assistance. While connecting the cables to the H-6200-Q-H00AA motor, make sure the power is turned off.