Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPF Servo Motors MPF-B330P-MJ22AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPF-B330P-MJ22AA

|
Need a Specific Revision?

The Allen-Bradley/Rockwell Automation MPF-B330P-MJ22AA servo motor has a magnet stack length of 3 inches and it comes with a shaft seal that is lubricated with a food-grade grease. This motor is intended for applications in the food industry. This motor is a premium permanent magnet rotary servo motor type from the MPF series.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPF-B330P-MJ22AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPF Servo Motors
Part NumberMPF-B330P-MJ22AA
Weight10.25 lbs (4.65 kg)
DevicePremium Permanent Magnet Rotary Servo Motor
ClassFood Grade
Voltage Class400V
Frame Size100 mm
Magnet Stack Length3 Inches
Rated seed5000 rpm
FeedbackMulti-Turn High-Resolution Encoder
EnclosureIP 66/IP 67
ConnectorsCircular DIN Right Angle 180 Degrees Rotatable
Mounting FlangeIEC Metric Oversized Flange
Request a Repair

The MPF-B330P-MJ22AA rotary servo motor is a servo motor that has been designed and distributed by Allen-Bradley/Rockwell Automation. This servo motor is part of the MPF series of servo motors that are designed for the food and beverage industry. The design of this motor is based on premium permanent magnet motor technology that comes with a magnet stack length of 3 inches and a frame size of 100 millimeters. Physically, the Allen-Bradley/Rockwell Automation MPF-B330P-MJ22AA servo motor comes with a conformal coat that is suitable for the food industry and the motor is covered in an IP 66 or IP 67 enclosure that protects the motor from contact with particles and moisture that might enter the motor and cause malfunctioning during operations. There is also a shaft seal on the motor shaft that is also food grade and moisture proof. The grease that lubricates it is a special food-grade grease.

The Allen-Bradley/Rockwell Automation MPF-B330P-MJ22AA servo motor operates with a voltage rating of 400 Volts and it has a rated operating speed of 5000 RPM, which is its maximum speed. This servo motor has a continuous stall torque of 4.18 N-m and a motor rated output of 1.8 kilowatts. To extend the life of the Allen-Bradley/Rockwell Automation MPF-B330P-MJ22AA servo motor, it is recommended to perform regular maintenance on it about every 3 months, including inspections that determine whether the motor and all of its components are in good condition to keep operating. The cables and wiring connections might need to be tightened up periodically and the shaft seal might need to be lubricated or replaced if it has worn out.