MPF-B430P-MJ74BA

The Allen-Bradley MPF-B430P-MJ74BA is a food grade rotary servo motor in the MP Series with permanent magnet technology. It also features a multi-turn high-resolution encoder, standard factory designated options, and a 24V DC brake. It comes with a 5000 rpm rated speed and 400V voltage class. The peak stall torque of this motor is 19.8 N.m or 175 lb.in, while its continuous stall torque is 6.55 N.m or 58 lb.in. The MPF-B430P-MJ74BA also has a 5000 rpm speed at the motor’s rated output and a 2 kW rated motor output. The magnet stack length of this controller is 3 inches and its frame size is 115 mm. The MPF-B430P-MJ74BA food-grade motor uses a circular SpeedTec DIN connector that has a right angle and is 180o rotatable and it uses an oversized IEC metric mounting flange and an IP66/IP67 housing with a keyed shaft. It has the Type FF mounting holes.

Minimize electrical noise or electromagnetic interference (EMI) around the MPF-B430P-MJ74BA motor because these stray signals can interfere with the motor's performance. You can prevent EMI by isolating the power transformers and grounding all the equipment.

When maintaining or cleaning the MPF-B430P-MJ74BA food grade servo motor, do not spray fluids directly at or onto the motor, the connectors, or the enclosure’s joints. Be especially careful with abrasive cleaning fluids or avoid using such cleaning fluids when possible. The fluids may cause short-circuiting, electrocution, contamination, or corrosion. To minimize the risk of fluid damage, wire the MPF-B430P-MJ74BA motor so that its cables form drip loops that direct fluids away from the motor and its connections.