The MPF-B430P-SJ74BA servo motor is an Allen-Bradley MPF series servo motor. MPF series servo motors are specially designed for food applications such as food handling and packaging. The housing of the motor is coated in food-grade epoxy. Food grade grease is also applied on the motor shaft seal. MPF servo motors feature shaft-end threaded holes, SpeedTec DIN connectors which are 180 degrees rotatable, and standard IEC mounting dimensions. Kinetic MPF motors are certified by the UL and CSA standards. MPF motors are available with high performance encoders. In the MPF-B430P-SJ74BA servo motor, there is a 1024 sin/cos absolute single-turn encoder with Hiperface protocol support. The rated speed of the motor is 5000 RPM. The peak speed of the motor is 5000 RPM.

The MPF-B430P-SJ74BA servo motor is rated for 400 Volts AC. The shaft on the motor includes a keyway. The motor housing has IP 66/IP 67 environmental protection rating. The frame size of the MPF-B430P-SJ74BA servo motor is 115 millimeters. The length of the magnet stack on the MPF-B430P-SJ74BA servo motor is 76.2 millimeters. The MPF-B430P-SJ74BA servo motor also includes an onboard 24 Volts DC holding brake. The maximum backlash for the brake when it is engaged is 37 arc minutes. The holding torque for the holding brake is 90 pounds on an inch and the coil current range is 0.57 to 0.704 Amps. The holding brake on the motor weighs 90 pounds. Other options which can be ordered for MPF motors include positive air pressure kits and shaft seal kits which are designed to reduce motor wear. To avoid personal injury and motor damage, the motor should not be lifted by the motor shaft.