MPL-A1520U-EJ42AA

The MPL-A1520U-EJ42AA servo motor is a premium permanent magnet rotary servo motor featuring a voltage rating of 230 Volts AC. It is classified as a low-inertia servo motor. The MPL-A1520U-EJ42AA servo motor is a 7000 revolutions per minute rated servo motor and it comes with the single-turn high-resolution encoder feedback. The MPL-A1520U-EJ42AA servo motor is designed with a shaft key enclosure type and it comes with a 24 Volts DC brake. The MPL-A1520U-EJ42AA servo motor should be handled with maximum care in order to prevent personal injury. The MPL-A1520U-EJ42AA servo motor is a small frame motor featuring a 63 millimeters frame size and 2.0-inch magnetic stack length. The MPL-A1520U-EJ42AA servo motor features the IEC metric mounting flange as well as the standard factory designated servo motor options.

When removing the MPL-A1520U-EJ42AA servo motor from the packing material, avoid lifting or handling the motor by the motor shaft. This is because the cap on the motor shaft might slip off, causing the users to drop the motor and this could result in damaged motor components or injury. It is recommended that the MPL-A1520U-EJ42AA servo motor be installed and operated in a clean environment. The ambient storage temperature is between -30 degrees Celsius and 70 degrees Celsius. The ambient operating temperature range for all the Allen Bradley servo motors like this one is 0 to 40 degrees Celsius. In addition, the users must make sure that there are no corrosives in the installation environment. The relative humidity range is 5% to 95%, non-condensing. Ensure that each of the servo motor’s cables has a drip loop that will carry liquids away from the motor because liquids can easily damage the inner components or cause corrosion in the outer enclosure.