MPL-A1520U-VJ74AA

The MPL-A1520U-VJ74AA servo motor is designed and manufactured by Allen-Bradley, a division of Rockwell Automation. The MPL-A1520U-VJ74AA servo motor is classified as an MP series servo motor that features the 24 Volts DC holding brake option. The MPL-A1520U-VJ74AA servo motor comes with the IEC metric mounting flange and it has a rated motor speed of 7000 revolutions per minute. The MPL-A1520U-VJ74AA servo motor features the 2-inch magnetic stack length and it comes with a frame size at 63 millimeters. The MPL-A1520U-VJ74AA servo motor has a shaft key without a shaft seal and it features a circular DIN right angle 180-degree rotatable connector. The MPL-A1520U-VJ74AA servo motor can be damaged if the motor bearings and the feedback device experience a sharp impact on the shaft during the installation of the drive couplings and the pulleys. While mounting the MPL-A1520U-VJ74AA servo motor, do not strike the shaft or the mechanical connectors because this can damage them.

The MPL-A1520U-VJ74AA servo motor requires sufficient clearance, heat sink mass, and airflow for the motor to ensure that it is operating within the ambient operating temperature range of 0 to 40 degrees Celsius. The ambient storage temperature range is from -30 to 70 degrees Celsius and the unit should not be enclosed unless there is a provision for forced air to be blown across the motor to ensure sufficient cooling. The Allen-Bradley servo motors are capable of operating within a sustained shaft load. The radial and axial load force locations should be observed when mounting the unit. The Allen-Bradley servo motors feature an innovative winding technology that yields up to 40% higher torque per unit size compared to the conventional servo motors.