MPL-A1530U-EJ42AA

The Allen-Bradley MPL-A1530U-EJ42AA is a Servo motor that is part of the Kinetix MP Series Low-inertia motors. This servo motor has a compact design, smaller motor size however, capable of delivering high Torque output. It is a brushless servo motor that is powered by an external supply voltage of 230VAC.

As the catalog number depicts, this Servo motor belongs to the 230VAC class motors with frame size 15 which means 63 mm or 2.48 inches. It also has a magnet stack which measure 76.2 mm or 3.0 inches in length. It is designed to achieve a maximum operating speed of 7000 revolutions per minute (rpm) and delivers an output power of 0.39 kW and output Current of 2.8 Amperes. For monitoring of the servo motors position, it uses a single-turn high-resolution absolute encoder with 128 sin/cos using the Hiperface protocol.

The MPL-A1530U-EJ42AA comes with a keyed shaft with no shaft seal installed. To achieve IP66 protection, an appropriate shaft seal may be installed with catalog number MPL-SSN-F63F75. Motor connections is made using the right-angle Circular (SpeedTec) DIN connector which rotated up to 180 Degrees to attach to the motor cabling mechanism. This servo does not come with an internal brake, external braking such as dynamic braking resistors may be needed to absorb energy that is produced when the motor is put to stop. For installation, this motor is provided with IEC metric sized, type FF free mounting holes and a standard flange. This servo motor requires a Kinetix servo drive to be operated properly.

The Allen-Bradley/Rockwell Automation MPL-A1530U-EJ42AA servo motor is a 0.39 kiloWatts servo motor. It has a rotor inertia rating of 0.000023 Kg-m (squared), a continuous stall torque of 0.9 N-m, and a rated peak stall torque of 2.8 N-m. The MPL-A1530U-EJ42AA servo motor has an operating relative humidity range of a minimum of 5% and a maximum of 95% without condensation. The MPL-A1530U-EJ42AA servo motor falls into the Allen-Bradley/Rockwell Automation MP series family of low-inertia servo motors. This family of motors includes food-grade motors and stainless-steel motors. Food-grade motors are designed with characteristics that enable them to be used in close proximity to food. They can be used in applications such as beverage and food packaging. Stainless steel motors, on the other hand, are designed to meet the unique needs of hygienic environments. They can be used in applications such as food slicing and filling, raw food handling, and other consumer products applications. The MPL-A1530U-EJ42AA servo motor, like other motors in the same family, supports factory manufactured feedback and power cables. These cables are capable of providing the sealing that is needed to achieve high environmental protection ratings and shield termination. However, the MPL-A1530U-EJ42AA servo motor accommodates field-built cables too, provided that they follow the required guidelines and use Allen-Bradley/Rockwell Automation connector kits. The Allen-Bradley MPL-A1530U-EJ42AA servo motor operates optimally at a temperature between 0 degrees Celsius and 40 degrees Celsius. To obtain the specified motor thermal ratings, the motor should be mounted on a surface with a heat dissipation level equivalent to an aluminum heatsink that measures 12 inches by 12 inches by 0.5 inches. When being stored, the MPL-A1530U-EJ42AA servo motor accommodates a temperature of between -30 and 70 degrees Celsius.