MPL-A1530U-HJ42AA

The Allen-Bradley/Rockwell Automation MPL-A1530U-HJ42AA servo motor is a premium permanent magnet AC motor. To avoid personal injury and damage to the servo motor, the MPL-A1530U-HJ42AA servo motor should not be lifted or handled by the motor shaft. This is because the cap on the shaft can become loose causing the motor to drop. After purchasing the motor, and before mounting it, it should carefully be removed from its shipping container and inspected for any damages. The most critical parts to check for damages include the motor frame, front output shaft, and the mounting pilot. Additionally, to prevent damaging the motor, the protective cap that is installed on the motor shaft should either be pried off with a screwdriver or by hand. The cap should not be removed by using a hammer or other tools.

The Allen-Bradley MPL-A1530U-HJ42AA servo motor has a 63-millimeter frame size. This makes the MPL-A1530U-HJ42AA servo motor a small frame motor compared to other motors in the Allen-Bradley MPL low-inertia series of servo motors. The operating voltage for the servo motor stands at 200 Volts AC. For motor position purposes, the MPL-A1530U-HJ42AA servo motor employs a 2000-line feedback encoder. The motor does not feature a shaft seal although it does feature a shaft key. Note that the key makes connecting the motor with the controlled machine easy. The MPL-A1530U-HJ42AA servo motor has a rated speed of 7000 revolutions per minute. The motor’s rated output is 0.39 kilowatts while its rotor inertia stands at 0.000023 kilograms per meter squared and its continuous stall torque stands at 0.90 N-m.