MPL-A1530U-VJ74AA

Designed by Allen-Bradley, the MPL-A1530U-VJ74AA servo motor is a premium permanent magnet rotary servo motor that is classified under the low-inertia series. The MPL-A1530U-VJ74AA servo motor features a power voltage rating of 200 Volts AC and it comes with a 63 millimeters frame size. The Allen-Bradley low-inertia servo motor is built with the magnetic stack length of 30, and it has a rated motor speed of 7000 revolutions per minute. The MPL-A1530U-VJ74AA servo motor is a multiple turn high-resolution encoder feedback motor, featuring a shaft key and a circular DIN right angle 180 degrees rotatable connector. The MPL-A1530U-VJ74AA servo motor features a 24 Volts DC brake and it comes with the standard factory designated control options with the IEC metric mounting range.

The MPL-A1530U-VJ74AA servo motor should be installed and operated in a clean environment. Ensure that the storage and operating environment meet the minimum conditions in the manufacturer’s guidelines. The shock resistance rating is 20 G peak for up to 6 milliseconds. The unit should be stored and operated in an environment at 5 to 95% non-condensing relative humidity. The storage temperature range is -30 to 70 degrees Celsius while the operating temperature range is 0 to 40 degrees Celsius. The MPL-A1530U-VJ74AA servo motor features an aluminum housing while the shaft key is made from carbon steel. The axial and radial shaft should not exceed those that are specified in the user manual. Note that while in operation, the outer surface of the servo motor can reach up to 125 degrees Celsius. Therefore, accidental contact with a hot surface can result in serious injuries.