MPL-A210V-VJ74AA

The MPL-A210V-VJ74AA servo motor is a low-inertia servo motor that is designed and manufactured by Allen-Bradley. The motor belongs to the Allen-Bradley MP series of low-inertia servo motors from. The MPL-A210V-VJ74AA servo motors, like other servo motors in this series, has a mounting pilot to assist in aligning the motor on a machine. Note that when fastening the motor onto a machine, stainless steel fasteners are the preferred fastening option. Additionally, the mounting and installation processes must follow the local and international electrical codes. The installation of the MPL-A210V-VJ74AA servo motor should address electromagnetic compatibility. After mounting the MPL-A210V-VJ74AA servo motor, any unattached equipment like disconnected cables and mechanical couplings should be identified and addressed before power is applied to the motor.

The MPL-A210V-VJ74AA servo motor has its input voltage capped at 230 Volts AC and it has a frame size of 2.95 inches. Also, the motor has a magnetic stack designator of 10 and its rated speed is 8000 revolutions per minute (RPM). The MPL-A210V-VJ74AA servo motor uses a single-turn high-resolution encoder for the feedback, and it has a shaft key but it lacks a shaft seal. It has a 24 Volts DC brake. For the connectors, the MPL-A210V-VJ74AA servo motor has circular DIN connectors placed at right angles. The connectors can rotate anywhere within 180 degrees. The motor has an IEC metric mounting flange and it features all of the standard factory options. The MPL-A210V-VJ74AA servo motors, like other motors in the same series, should be installed with the cable entry point positioned underneath the motor housing, and with a drip loop provided on each cable. The drip loop in the cable prevents water or other liquids from flowing along the cable and damaging the servo motor and its connections.