Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-A220T-EJ74AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-A220T-EJ74AA

|

The Allen-Bradley MPL-A220T-EJ74AA motor is an MP series servo motor. It has a rated maximum rotor speed of 6000 RPM. The protective housing of the MPL-A220T-EJ74AA servo motor is IP 50-rated.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-A220T-EJ74AA

ManufacturerAllen Bradley
Product TypeServo Motor
Product LineMPL Servo Motors
Part NumberMPL-A220T-EJ74AA
UPC884951213562
Weight12.00 lbs (5.44 kg)
Protection RatingIP 50
Rotor Speed6000 RPM
Input Voltage200 Volts AC
Frame Size75 milimeters
Rated Output Power0.62 kilowatts
Holding BrakeYes
ConnectorSpeedTec DIN

The Allen-Bradley MPL-A220T-EJ74AA motor is a MP series low-inertia servo motor. The MP series of motors comprises brushless servo motors that are made for high-performance industrial control systems. The rated rotor speed of the MPL-A220T-EJ74AA servo motor is 6000 RPM and the maximum rotor speed is also 6000 RPM. The voltage rating of the motor is 200 Volts AC. The frame size of the MPL-A220T-EJ74AA servo motor is 75 millimeters and the magnet stack length is 50.8 millimeters or 2 inches. The continuous torque rating of the motor is 1.61 N-m and the peak torque rating is 4.74 N-m. The rated output power of the MPL-A220T-EJ74AA motor is 0.62 kilowatts. The approximate motor weight is 2 kilograms. The holding brake on the motor operates at 24 Volts DC and it has a holding torque of 4.5 N-m.

The weight of the holding brake on the Allen-Bradley MPL-A220T-EJ74AA MP series servo motor is 2.4 kilograms. The brake release time is 58 milliseconds. The brake engage time is 20 milliseconds for the MOV and 42 milliseconds for the diode. Feedback is available through a 128 sin/cos absolute single turn encoder with the Hiperface protocol. The motor shaft has a shaft key but not a shaft seal. The power connector on the motor is a SpeedTec circular DIN connector that is 180 degrees rotatable. The motor is designed for flange mounting and it comes with an IEC metric flange with free mounting holes. The radial load force ratings for the MPL-A220T-EJ74AA servo motor are 27 kilograms at 1000 RPM, 18 kilograms at 3500 RPM, and 15 kilograms at 6000 RPM. Only qualified technicians should install and operate the servo motor.