MPL-A310F-HK72AA

The Allen-Bradley MPL-A310F-HK72AA servo motor is a brushless AC synchronous servo motor. It is designed to operate at 200 Volts AC input voltage. The product line to which the motor belongs is the MPL product line in the MP series of low inertia servo motors that support up to 8000 RPM rotor speeds, 0.16 to 18.6 kilowatts of output power, and 0.26 to 163 N-m of continuous torque. The MPL series servo motors can be used with various servo drives from Allen-Bradley, including the Kinetix 6000, Kinetix 7000, and Kinetix 300/350 drives. Typical applications for MPL motors include automotive, electronic assembly, converting, and packaging applications. The MPL-A310F-HK72AA motor has a 100-millimeter frame size and a 25.4-millimeter or 1-inch magnet stack length. The rated rotor speed of the motor is 3000 RPM. The motor shaft has neither a shaft key nor a shaft seal.

The Allen-Bradley MPL-A310F-HK72AA MP and MPL series servo motor has a built-in incremental encoder rated for 2000 lines of feedback per revolution. The electrical and feedback connections are made with right-angle circular DIN connectors that can be rotated 180 degrees. A holding brake is not supported on the MPL-A310F-HK72AA servo motor. However, a holding brake is an option for the MPL motors and it can be ordered separately if needed. Another optional that can be ordered depending on application requirements is a shaft seal kit which can be used to increase the protection rating of the motor from IP 50 to IP 66. The MPL-A310F-HK72AA servo motor is a flange-mounted motor: The motor flange is built according to the IEC standards with free mounting holes. The MPL-A310F-HK72AA servo motor is available with all the standard factory options. Only trained and qualified technicians should install the motor and associated equipment.