MPL-A320H-HK24AA

The MPL-A320H-HK24AA servo motor is a low-inertia servo motor with position detection that has been designed, produced, and distributed by Allen-Bradley, a division of Rockwell Automation. It belongs to the Allen-Bradley MP series of servo drives. This motor is a permanent-magnet rotary servo motor. It contains a magnet stack of 2 inches and a length of 100 millimeters combined with an IP 50 rated housing. The Allen-Bradley MPL-A320H-HK24AA low-inertia servo motor has a voltage rating of 200 Volts AC and it can reach a maximum speed of 5000 rpm. It is compatible with applications within these specifications and that requires a high-speed motor with a medium voltage rating. One of the benefits of this servo motor is that it employs an incremental encoder that is able to detect position within 2000 lines per revolution. This detection system is very accurate and it enables the motor to operate in a stable position without causing deviation and without modifying the axial and radial positions of the servo motor.

It is important to note that the Allen-Bradley MPL-A320H-HK24AA low-inertia servo motor does not contain a shaft key or a shaft seal and under these circumstances, it is dangerous to expose the motor to liquids or water jets without being exposed because water can lead to immediate damage. It is recommended to install a shaft seal if the requirements of the motor and the conditions it will be operating in call for it. Another protective feature that is highly recommended is the installation of an additional shield in order to protect the housing and connection of the drive. The Allen-Bradley MPL-A320H-HK24AA low-inertia servo motor needs to be installed in a non-corrosive environment without the presence of any potentially damaging substances.