MPL-A320H-SK72AA

The Allen-Bradley MPL-A320H-SK72AA servo motor is an MPL series AC rotary servo motor with a low-inertia and brushless design. It is one of the Kinetix MPL series servo motors from Allen-Bradley/Rockwell Automation that is designed to meet the users’ application-specific servo motor needs. This MPL series low-inertia servo motor comes in a compact frame size of 3, which measures 100 millimeters in dimensions. It has a magnet stack length of 2 inches and a rated maximum rotor speed of 3500 RPM. Despite the small size, this servo motor provides significantly high levels of torque. It has a continuous stall torque rating of 3.05 N-m and a peak stall torque rating of 7.91 N-m. The MPL-A320H-SK72AA servo motor is an AC synchronous servo motor that comes with premium permanent and high-energy rare-earth magnets inside its rotor, resulting in higher device efficiency. It has an operating voltage rating of 230 Volts and a rated output of 1 kilowatt.

The Allen-Bradley MPL-A320H-SK72AA Kinetix MPL series servo motor features a single-turn high-resolution absolute feedback encoder and it supports the Hiperface protocol. It has a keyless shaft and therefore it requires a longer lead time. This MPL series servo motor also lacks a shaft seal. This motor is outfitted with SpeedTec DIN connectors that rotate up to 180 degrees. The connectors should be used with compatible SpeedTec DIN cable plugs. When installing the motor, it is recommended to provide a drip loop in each cable to carry liquids away from the terminal connection points in order to extend the operating life of the motor. The motor comes with an IP 50 environmental protection rating when it is mounted with the shaft facing upwards. This MPL series servo motor does not have a built-in holding brake. The MPL-A320H-SK72AA servo motor supports flange mounting via its free mounting holes.