Product image is representative; revision or series may vary. Contact us to request a specific version.
MPL-A320P-SJ72AA
This low rotor inertia AC servo motor manufactured by Allen-Bradley is a 5000 rpm rated smart motor. This MPL servo has a magnetic stack length of 2 in. This MPL permanent magnet servo motor comes with a shaft key, but no shaft seal built-in. This MPL Series AC synchronous servo motor in addition comes with a high-resolution single turn encoder feedback included. Also, this motor is a 100 mm frame size servo motor.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for MPL-A320P-SJ72AA
| Manufacturer | Allen Bradley |
|---|---|
| Category | Motors |
| Product Line | MPL Servo Motors |
| Part Number | MPL-A320P-SJ72AA |
| UPC | 820919979101 |
| Weight | 8.00 lbs (3.63 kg) |
| Series | Premium permanent magnet rotary servo motor |
| Series Type | Low-inertia |
| Voltage Class | 200 Volts AC |
| Frame Size | 100 millimeters |
| Magnetic Stack Length | 2 inches |
| Rated Speed | 5000 rpm |
| Feedback | Single-turn high-resolution encoder |
| Shaft Key/Seal | Shaft key/no shaft seal |
| Connectors | Circular DIN, right angle, 180 degrees rotatable |
| Brake | No brake |
| Mounting Flange | IEC metric |
| Factory Designated Options | Standard |
The MPL-A320P-SJ72AA servo motor is an Allen-Bradley MP-series servo motor. The MPL-A320P-SJ72AA servo motor features a power voltage of 230 Volts AC. The module comes with a speed rating of 5000 revolutions per minute and a torque rating of 3.05 N-m. The frame size for this Allen-Bradley servo motor is 100 millimeters while the magnet stack length is 2.0 inches. The MPL-A320P-SJ72AA servo motor features a keyed shaft extension enclosure and it comes with a SpeedTEC DIN connector. The feedback option for the MPL-A320P-SJ72AA servo motor is a single-turn high-resolution encoder with no brake. The MPL-A320P-SJ72AA servo motor is a shaft key/no shaft seal servo motor that features the IEC metric mounting flange and the standard factory designated control options. For optimal performance, ensure that all of the Allen-Bradley equipment is installed in an environment that meets the minimum conditions in the manufacturer’s handbook. The MPL-A320P-SJ72AA servo motor features an operating temperature range of 0 to 40 degrees Celsius. The recommended storage temperature range for this module is from -30 to 70 degrees Celsius. The MPL-A320P-SJ72AA servo motor features a relative humidity range at 5 to 95%, non-condensing, and it should be installed in a non-corrosive environment.
Allen-Bradley servo motors feature factory-manufactured feedback and power cables. These cables come in standard cable lengths with the recommended environmental sealing and shield terminations. If a replacement is needed, contact the manufacturer or check the user manual for guidelines on the replacement of the MPL-A320P-SJ72AA servo motor. Note that only authorized technicians should be involved in the installation, testing, and commissioning of this unit. When attaching the MPL-A320P-SJ72AA servo motor’s cable connectors, the keyed connections must be properly aligned. In addition, ensure that these are hand-tightened and that the recommended number of turns are met. Note that an improper connector alignment is apparent when excessive force is needed to fully seat the connectors.
| Revision Part # | Also known as | |
|---|---|---|
| MPL-A320P-SJ72AA Ser A | MPL-A320P-SJ72AA/A, Series A, Rev A | |
| Don't see your particular revision? Contact us now. | ||
- MPL-A32OP-SJ72AA
- MPLA320PSJ72AA
- MPLA32OPSJ72AA
This Premium permanent magnet rotary servo motor (Low inertia) includes a 200V, 100 mm frame size, with a magnetic stack length of 2 in., a rated speed of 5000 rpm, a Single-turn high-resolution encoder feedback, Shaft key/no shaft seal, Circular DIN, right angle, 180 degrees rotatable, No brake, IEC metric, and Standard designated options.