MPL-A330P-MJ74AA

The MPL-A330P-MJ74AA is a Kinetix servo motor by Allen-Bradley. This servo motor is specifically part of the low-inertia MPL series used to implement motion and position control to a wide variety of industrial applications such as Packaging, Converting, Material handling, Electronics assembly, Automotive, Metal forming and similar applications. Typically, servo motors are controlled by Servo Drives. With the MPL-A330P-MJ74AA, compatible Allen-Bradley servo motors are Kinetix 5500, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, Kinetix 7000 and Ultra3000. The MPL-A330P-MJ74AA has a 200 V class winding specifically, 230 VACrms, 3-Phase input voltage. It also utilizes high-energy rare earth magnets which contribute to a more efficient startup and faster acceleration. It has power rating of 1.8 kW or 2.4 HP with maximum operating speed of 5000 rpm. It has a continuous stall torque of 4.18 N-m (37 lb-in), peak stall torque of 11.1 N-m (98 lb-in), rotor inertia of 0.00012 kg-m2 (0.00010 lb-in-s2) maximum operating speed of 5000 rpm. This servo motor is preinstalled with a 24V DC brake for implementing dynamic braking. This servo motor supports Smart Motor technology where motor identity can be recognized over the network of multiple servo motors. It contributes to lesser engineering time and faster startup and commissioning time. This servo motors comes with a standard IP50 environmental rating which can be increased to IP66 with the use of optional shaft seal with catalog number MPL-SSN-A3B3 with environmentally sealed cable connectors. Shaft seals experience wear and tear during operation and must be serviced every 3 months or once in 12 months.

The MPL-A330P-MJ74AA servo motor from Allen-Bradley/Rockwell Automation is a low-inertia type of servo motor. It has been designed as a member of the Allen-Bradley MPL Servo Motors series. It is also part of the 200 Volts voltage class in the MPL Servo Motors series. The MPL-A330P-MJ74AA low-inertia servo motor is made to fit into a 100-millimeter-sized frame. Its magnet stack length is 3 inches and its maximum rated motor speed is 5000 RPM. The type of encoder that it uses is a multi-turn and high-resolution type of encoder and it has a shaft key but no shaft seal. Some MPL Servo Motors do not have brakes, but the MPL-A330P-MJ74AA low-inertia servo motor comes with a 24 Volts DC brake. It also comes with an IEC mounting flange and the standard factory-designated options. The Allen-Bradley/Rockwell Automation MPL-A330P-MJ74AA low-inertia servo motor from the MPL Servo Motors series is suitable for applications in high-performance types of motion systems and it is a brushless type of servo motor. When the MPL-A330P-MJ74AA low-inertia servo motor needs to be picked up or handled for any reason, it should never be grasped or carried by its shaft. If the motor is carried by its shaft, the cap on the shaft may come off and cause the motor to be dropped and damaged. The shaft cap does need to be removed before the MPL-A330P-MJ74AA low-inertia servo motor is put into operation, but it should be removed carefully by hand or with a screwdriver and never with a hammer or another blunt tool. Shields and shaft seals can be installed in this servo motor to protect it and extend its operating life.