MPL-A330P-SK24AA

The MPL-A330P-SK24AA servo motor is an MPL series low-inertia AC rotary servo motor from Allen-Bradley. It is a self-synchronizing servo motor that offers high levels of torque in a small package and that is able to meet the demands of high-performance industrial-grade motion control systems. The MPL-A330P-SK24AA servo motor contains permanent high-performance rare-earth magnets in its rotor, and this provides it with higher torque, greater acceleration, and a longer lifespan than traditional servo motors. This servo motor has a 230 Volts rated copper winding and it uses advanced winding technology to produce more torque for its frame size. Its key features include a low rotor inertia rating of 0.00012 kilograms per square meter and Smart Motor Technology that helps to retain the motor identity and to reduce the start-up time. The maximum rotating speed of the MPL-A330P-SK24AA servo motor is rated at 5000 revolutions per minute with 4.18 N-m and 11.1 N-m of continuous and peak stall torque, respectively.

The Allen-Bradley MPL-A330P-SK24AA MPL series servo motor is available with a 24 Volts DC rated brake with a holding torque rating of 4.18 N-m and a coil current rating of 0.45 to 0.55 Amps.  The brake’s rotor inertia is 0.00013 kilograms per square meter and the brake motor weighs approximately 5.6 kilograms. The MPL-A330P-SK24AA servo motor has a radial load force rating of 43 kilograms and an axial load force rating of 13 kilograms. This motor comes with a keyless shaft and no shaft seal. The connectors on the MPL-A330P-SK24AA motor have a circular bayonet that faces the motor shaft. The motor features a Hiperface feedback system with an absolute single-turn (1024 sin/cos) encoder. The motor's feedback, power, and brake connectors are compatible with the Allen-Bradley 2090-series servo motor cables, which can be ordered separately. The MPL-A330P-SK24AA servo motor supports flange-mounting with a bolt circle with a diameter of 100 millimeters.