MPL-A420P-HJ72AA

The Allen-Bradley MPL-A420P-HJ72AA is a brushless AC synchronous servo motor that is part of the low-inertia MPL series. This servo motor is installed with high-energy rare earth magnets that contribute to the motor’s faster acceleration and high torque output in relation to the servo motor’s 115 mm frame size. The MPL-A420P-HJ72AA is equipped with on-board smart motor technology feature which allows the motor to be identified in the network as it is capable of retaining motor identity provided by the on-board memory. Additionally, this servo motor utilizes SpeedTec connectors that provide secure wiring and offers less susceptibility against vibration and shock. This connection method is a UL-Listed, NFPA 79 compliant, ROHS and REACH compliant with insulation rating of 600 V. The MPL-A420P-HJ72AA is a 200 V class servo motor, energized by providing an input supply voltage of 230 VAC, 3-Phase. It has rated speed of 5000 rpm and rated output power of 2.0 kW. It has continuous stall torque of 4.74 N-m or 42 lb-in and peak stall Torque of 10.2 N-m or 90 lb-in. It has continuous stall current of 12.7 Amperes (0-pk) and peak stall current of 46. 0 A (0-pk). This motor has Rotor inertia of 0.00026 kg-m2 or 0.0023 lb-in.-s2. The MPL-A420P-HJ72AA is delivered without a shaft seal installed. Without a shaft seal, the protection rating of this motor is rated IP50. With the installation of an appropriate shaft seal, protection rating may go up to IP65 / IP66 if used with an environmentally sealed cable connectors. This servo motor is designed especially for use in packaging, converting, material handling, electronic assembly and automotive applications.

The Allen-Bradley MPL-A420P-HJ72AA is a 230 Volt brushless motor with absolute feedback and is part of the Bulletin MP-Series Low Inertia Servo Motors. Compact and highly dynamic, it is built to meet the high demands of high-performance motion systems. It has a frame size of 4 which converts into measurements of 115 millimeters or 4.53 inches. This non-brake motor comes with a rated speed of 5000 RPM (Revolutions Per Minute) with 2.0 kW output and rotor inertia of 0.00026 kilogram-meter2. It has a continuous stall torque of 4.74 N-m (42 pounds to an inch.) that peaks at 10.2 N-m (90 pounds to an inch.). Ideal applications include automotive, converting, electronics assembly, packaging, material handling and metal forming. The MPL-A420P-HJ72AA Brushless Servo Motor is an Incremental Encoder Version that offers quicker acceleration with its high energy, rare-earth magnets. It provides better heat transfer and enhanced thermal management with its improved winding insulation material. Constructed using an innovative winding technology, this motor can yield up to 40% higher torque per unit size compared with conventional servo motors. Plus, it features the smart motor technology that reduces commissioning time by allowing onboard memory to retain motor identity and automatically communicating the identity to the system upon startup.