MPL-A430H-HK24AA

The MPL-A430H-HK24AA servo motor is an MP series low-inertia servo motor manufactured by Allen-Bradley. The rotor inertia rating of this motor is 0.00038 kg-m2 and its speed rating is 3500 revolutions per minute (RPM). It has an output power rating of 1800 Watts and its input voltage rating is 230 Volts AC. Other specifications of this drive include 6.21 N-m of continuous stall torque, 12.2 Amps of continuous stall current, and a 115 millimeters frame size. To achieve an IP 66 protection rating, an Allen-Bradley MPL-SSN-A4B4 servo motor shaft seal kit must be used on the MPL-A430H-HK24AA low-inertia servo motor. A 2000 PPR line encoder that comes with the MPL-A430H-HK24AA servo motor provides 8000 quadrature counts per revolution and the motor features circular bayonet connectors facing its shaft. Note that the connectors on this motor are stationary, so attempting to change its orientation by force is not recommended because that may damage the servo motor.

The MPL-A430H-HK24AA servo motor’s smart memory automatically transmits its identity at the startup when it is connected to a new drive to reduce the time needed to tune the motor. It is compatible with Allen-Bradley Kinetix drives and it does not feature a holding brake. The effective heat transfer and thermal management of the MPL-A430H-HK24AA low-inertia servo motor help the servo motor maintain its highly dynamic performance throughout its runtime without overheating or causing nuisance trips. The winding design implemented on this motor provides greater torque performance too. For the best performance, Allen-Bradley recommends that cable lengths between the MPL-A430H-HK24AA servo motor and the drive that controls it are kept as short as possible.