MPL-A430H-MJ22AA

The Allen-Bradley MPL-A430H-MJ22AA is a Kinetix Servo motor from the MP series, low-inertia, high output to size ration servo motors. This servo motor is a brushless, asynchronous AS motor that contains rare-earth magnets and uses a feedback encoder that uses Hiperface protocol. Additionally, this servo motor is part of the Smart Motor technology solution as it has an integral memory that allows the motor to retain its motor identity.

The MPL-A430H-MJ22AA uses a 1024 sin/cos, absolute multi-turn encoder for monitoring the motor’s position. Additionally, it has a keyed shaft and comes with frame size 4 and 3.0 inches magnet stack length. It is used with a wide variety of compatible Kinetix Servo Drive controllers including the Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, and and Kinetix 7000. With an appropriate servo drive installed. This servo motor may be installed in applications including Packaging, Converting, Material handling, Electronic assembly, and Automotive applications.

The MPL-A430H-MJ22AA is UL Recognized component to applicable UL and CSA standards and CE marked for all applicable directives. It comes with an IP55 environmental rating without a shaft seal and meets IP66 when installed with an appropriate shaft seal.

The MPL-A430H-MJ22AA has a power output rating of 1.8 kW, continuous stall Torque rating of 6.21 NM and output current of 12.2 amperes. It has a rated speed of 3350 revolutions per minute (rpm) with maximum speed of 3500 rpm. It is provided with IEC metric, FF type mounting holes for installing the motor into place. It does not have an internal 24VDC holding brake and comes without a shaft seal.

The MPL-A430H-MJ22AA rotary servo motor is delivered with a factory installed multi-turn high-resolution encoder feedback unit. This type of permanent magnet servo motor was developed for use in the field of precise speed control and it is intended to be used in different industries. It is built from parts that can withstand heat and cyclic operations. Its bearings are engineered to last for more than 20,000 working hours. The motor is connected to other devices over 2 circular bayonet connectors that are facing the shaft. The Allen-Bradley MPL-A430H-MJ22AA servo motor does not require much maintenance, but only a proper maintenance routine that includes checking the couplings and connectors and cleaning out metal parts and dust. These procedures are not time-consuming and they will increase the life of the servo motor. The operating ambient temperature of the device is from 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit). The MPL-A430H-MJ22AA servo motor delivers 1.8 kilowatts of power and it supports loads that do not need more than 3500 revolutions per minute. When combined with the Allen-Bradley Kinetix series servo drives, this AC servo motor becomes a plug-and-play device that is very easy to set up and use. The MPL-A430H-MJ22AA servo motor delivers excellent repeatability for systems that need to be returned to the same location accurately as many times as needed.