Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-A430H-SK72AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-A430H-SK72AA

|
Need a Specific Revision?

The MPL-A430H-SK72AA servo motor is an Allen-Bradley MPL series low inertia servo motor. This servo motor is used for various industrial applications and it supports rotor speeds of up to 3500 revolutions per minute. It is part of the 200 Volts voltage class and it includes a single-turn high-resolution encoder for feedback.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-A430H-SK72AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-A430H-SK72AA
Weight12.00 lbs (5.44 kg)
Motor TypePremium Permanent-Magnet Rotary Servo Motor
Inertia TypeLow Inertia
Voltage Class200 Volts
Frame Size (IEC 72-1 Flange Number)115 Millimeters
Magnet Stack Length3 Inches
Rated Speed3500 RPM
FeedbackSingle-Turn High-Resolution Encoder
Shaft Key/SealNone
ConnectorsCircular DIN, Right Angle, 180 Degrees Rotatable
Brake OptionNone
Mounting PlateIEC Metric
Factory Designated OptionsStandard
Request a Repair

The catalog number MPL-A430H-SK72AA is reserved for an Allen-Bradley/Rockwell Automation low inertia servo motor that uses permanent magnet technology. The permanent magnet servo motor is part of the Allen-Bradley MPL series of servo motors and it is a low inertia and brushless type of permanent magnet servo motor. The MPL-A430H-SK72AA servo motor is manufactured to operate in the 200 Volts voltage category and it has a high-quality IP 50 rated protective housing that makes it suitable for a variety of industrial applications in different industrial environments. It can be used in most non-corrosive industrial environments with ambient temperatures between 0 and 40 degrees Celsius. The MPL-A430H-SK72AA servo motor does not come with a shaft key or a shaft seal, but if an optional shaft seal is ordered and installed, the protection rating of the servo motor will increase from IP 50 to IP 66 and its shaft will be well protected from liquids and particles. This servo motor does not have a holding brake.

The MPL-A430H-SK72AA MPL series servo motor has a frame size of 115 millimeters. The permanent magnets used by this servo motor are made from rare-earth metals and they are arranged in a stack in the rotor. This magnet stack is 3 inches long. The MPL-A430H-SK72AA servo motor derives its position feedback from a single-turn high-resolution encoder. The shaft extension of this motor is keyless and its mounting connectors are all DIN rated. The connectors carry a SpeedTEC mark and they are designated as right angle connectors. In addition to that, these connectors can be rotated up to 180 degrees in either direction and they are designed to be connected quickly and securely. The rated rotor speed of the MPL-A430H-SK72AA servo motor is 3500 revolutions per minute. Frequent maintenance will grant the MPL-A430H-SK72AA servo motor a prolonged operating life. Maintenance of this motor includes repairing or replacing all worn out parts, such as optional shaft seals, and tightening any wire connections to the motor that have been loosened.