Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-A430P-HJ24AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-A430P-HJ24AA

|
Need a Specific Revision?

The MPL-A430P-HJ24AA constructed by AB is a 5000 rpm rated brushless servo. In addition, it has a hall incremental encoder feedback and comes with a 24V DC brake included in the servo motor. Furthermore, this unit also comes with bayonet style cable connectors that are built onto this brushless servo motor. This low rotor inertia AC motor additionally comes with power requirements of 200V. It comes with a keyed shaft built-in.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-A430P-HJ24AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-A430P-HJ24AA
Weight12.00 lbs (5.44 kg)
SeriesPremium permanent magnet rotary servo motor
Series TypeLow-inertia
Voltage Class200 Volts AC
Frame Size115 millimeters
Magnetic Stack Length3 inches
Rated Speed5000 rpm
Feedback2000-line encoder
Shaft Key/SealShaft key/no shaft seal
ConnectorsCircular bayonet, facing shaft
Brake24 Volts DC brake
Mounting FlangeIEC metric
Factory Designated OptionsStandard
View as PDF
Request a Repair

The Allen-Bradley/Rockwell Automation MPL-A430P-HJ24AA servo motor is a low-inertia servo motor. It has its operating voltage capped at 230 Volts AC and a rated output power of 2.2 kilowatts. Additionally, the MPL-A430P-HJ24AA servo motor has a rotor inertia of 0.0038 Kg-m (squared), a peak stall torque of 19.8 N-m, and a peak stall current of 67.0 Amps. The motor’s continuous stall torque and continuous stall current stand at 5.9 N-m and 16.8 Amps, respectively. The MPL-A430P-HJ24AA servo motor does not feature a shaft seal. However, it features a shaft key. When installing the MPL-A430P-HJ24AA servo motor, note that a mounting pilot is available to help in aligning the motor on the machine. Note that the mounting pilot is provided with the motor.

Also, Allen-Bradley recommends the use of stainless steel fasteners on the MPL-A430P-HJ24AA servo motor. After installing the motor, a general verification test should be done to ensure that the cables are correctly installed and restrained to prevent uneven tension or flexing at the connector. Allen-Bradley states that support throughout the cable run should be provided at 3-meter intervals. Note that uneven and or excessive lateral force at the cable connectors is capable of causing the connector’s environmental seal to open and close as the cable flexes. The Allen-Bradley MPL-A430P-HJ24AA servo motor has a rated speed of 5000 revolutions per minute and it contains a 2000-line feedback encoder. The motor has a 24 Volts DC brake, standard factory calibrated options, and a frame size of 115 millimeters. The MPL-A430P-HJ24AA servo motor belongs to the Allen-Bradley MP series of servo motors with low-inertia.

Revision Part #Also known as
MPL-A430P-HJ24AA Ser AMPL-A430P-HJ24AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.