MPL-A430P-MJ24AA

The MPL-A430P-MJ24AA servo motor is a servo motor from Allen-Bradley/Rockwell Automation. It utilizes a regular motor coupled with a sensor for positional feedback. The controller feature is the most important part of the servo motor design and the servo motor is used specifically for controlling bigger machines. This premium permanent magnet rotary motor runs with 200 Volts AC of voltage and it is enclosed inside a 115-millimeter frame. The MPL-A430P-MJ24AA servo motor is widely used in the industrial sector for accurate position sensing and motor rotation. A shaft seal is not included on this motor but an optional seal can be added to it if necessary. The added shaft seal is rated with an IP 66 protection rating and it is water-resistant. The motor is equipped with a multi-turn high-resolution feedback encoder which monitors the motor throughout the operation. The motor has a rated speed of 5000 rpm. A shaft key is included with the motor. The shaft key of the motor has a circular bayonet which faces the shaft. An IEC metric flange is used for mounting the motor in different locations.

The MPL-A430P-MJ24AA servo motor has a magnetic stack of 30. It is part of the low-inertia series of servo motors from Allen-Bradley. The motor possesses unique design characteristics which reduce the motor size while delivering high torque. The MP series of servo motors uses innovative winding technology which can produce up to 40% higher torque than the conventional servo motor. The MPL-A430P-MJ24AA servo motor needs to be installed in a location that is free from corrosive vapors, dust, and smoke. The installation environment should be clean and dry with no traces of electromagnetic noise. The motor is UL recognized and it meets the UL and CSA standards.