MPL-A430P-MJ72AA

The Allen-Bradley MPL-A430P-MJ72AA is a product component of the Kinetix MP series servo controller. This servo controller is a brushless, synchronous AC motor that is designed to operate when supplied with a 230VAC voltage supply.

Servo motors such as the MPL-A430P-MJ72AA is used to implement position control in different industrial applications including product packaging, converting, Material handling, Electronic components assembly, and Automotive applications. It implements motion and position control whether linear or rotary motion.

The MPL-A430P-MJ72AA has an output power rating of 2.2 kW, output current of 16.8 Amperes, Continuous stall Torque rating of 5.99 NM, peak stall Torque rating of 19,8 N-m, holding Torque of 10.2 N-m, rotor inertia of 0.00038 kg-m2 and coil current of 0.576-0.704 Amperes at 24VDC.

This motor is compatible for use with Kinetix servo drives such as Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, and Kinetix 7000. It is delivered without a 24VDC holding brake and shaft seal. These components can be purchased and installed separately to the MPL-A430P-MJ72AA servo motor. It uses a 1024 sin/cos, absolute multi-turn encoder that is compatible with Hiperface protocol.

The MPL-A430P-MJ72AA has radial load force ratings such as 106 kg or 234 lb at 500 rpm, 84 kg or 185 lb at 1000 rpm, 67kg or 148 lb at 2000 rpm, 55 kg or 121 lb at 3500 rpm, and 49 kg or 108 lb at 5000 rpm.

The The MPL-A430P-MJ72AA has axial load force ratings 52 kg or 115 lb at 500 rpm, 39 kg or 86 lb at 1000 rpm, 29 kg or 64 lb at 2000 rpm, 22 kg or 49 lb at 3500 rpm and 19 kg or 42 lb at 5000 rpm.

The MPL-A430P-MJ72AA order code specifies an MP-series motor with low inertia, from a 200 Volt voltage class. This servo motor has a 115-millimeter frame size, a 76.2 millimeter (3.0 inch) magnet stack length, a rated speed of 5000 rpm, and a rated output power of 2.2 kW. Feedback from this device is provided through a 1024 sin/cos absolute multi-turn encoder, which does not need a battery. Absolute position value increases when the motor shaft rotates in a clockwise direction (motor mounting face view). Connection to the motor is done over a circular connector (DIN, right-angled type, rotatable - 180 degree) and the product has no break. Communication with a servo drive goes over protocol that marks the servo drive as a master device and the motor as a slave device. The MPL-A430P-MJ72AA provides quick acceleration by using high-energy rare-earth magnets. Smart motor technology uses memory capabilities to preserve motor identity. This is used to report identity to the system during the startup process which reduces the time needed for commissioning. Motor-end connector kits can be ordered for MP-Series motors for the users who prefer to assemble their own cables.