MPL-A430P-SJ24AA

The MPL-A430P-SJ24AA servo motor is a top-class permanent magnet rotary servo motor manufactured by Allen-Bradley. This is a 1.9-kilowatt rated brushless AC servo motor from the Allen-Bradley MPL series of servo drives that require 230 Volts AC of supply voltage. To accurately control the speed of its shaft, this servo motor requires coupling with an AC servo drive. AC servo drive series that are compatible with the MPL-A430P-SJ24AA low-inertia MP series AC servo motor are the Allen-Bradley Kinetix 5500, 6000, 300/350, 7000, 2000, and Ultra3000 series. The nominal rotating speed of this servo motor is 5000 rpm.

The Allen-Bradley MPL-A430P-SJ24AA servo motor is delivered with an integrated 24 Volts DC holding brake. During power failures, this brake can be used as a stopping brake, but do not use this brake for emergency stop braking because this brake is not designed for that purpose. When any service activity needs to be performed on the servo motor, the proper procedure is to set the servo drive that controls the servo motor to a full stop, employ the integrated brake, and then disable the functioning of the servo drive. Noise immunity is important for the MPL-A430P-SJ24AA servo motor and its accompanying drive system. However, it is important to take further noise immunity precautions during the installation process and to use shielded cables for device installation. The MPL-A430P-SJ24AA servo motor is delivered with a single-turn high-resolution encoder that uses the Hiperface DSL encoder protocol. This servo motor comes with a shaft key and without a shaft seal that would prevent moisture and particles from entering the motor bearings. A shaft seal kit can be ordered separately if necessary.