MPL-A4520P-HK22AA

The MPL-A4520P-HK22AA servo motor is a brushless servo motor that has been designed and manufactured by Allen-Bradley. The servo motor uses an incremental feedback encoder that runs at a rate of 2000 lines per revolution. The MPL-A4520P-HK22AA servo motor belongs to the Allen-Bradley MPL series of low-inertia motors. Motors in this series have a high torque to size ratio. Additionally, the MPL-A4520P-HK22AA servo motor, as with other motors in the same family, features multiple winding speed options, standard IEC 72-1 mounting dimensions, and a shaft end threaded hole. Although the speed of the motor depends on the load that is applied, the motor is capable of reaching a rated speed of 5000 revolutions per minute.

The MPL-A4520P-HK22AA servo motor, like other motors in the same family, is designed to operate in an industrial environment where applications have heavier loads and greater inertia. These motors are capable of handling such applications by leveraging the MPL series motor technology among other characteristic features. The MPL-A4520P-HK22AA servo motor can comfortably operate with a voltage power source that has a rating of 200 Volts AC. The motor measures 130 millimeters in frame size and does NOT feature a shaft key or a shaft seal. However, a shaft seal can be installed if the MPL-A4520P-HK22AA servo motor is going to be used in an environment prone to liquids and fine dust. Without a shaft seal, the servo motor has an ingress protection rating of IP 50. For connections, the MPL-A4520P-HK22AA servo motor features circular bayonet connectors facing the shaft. Note that the motor does not feature a brake. The MPL-A4520P-HK22AA servo motor, like other motors in the same family, is compatible with a variety of Allen-Bradley Kinetix servo drives.