MPL-A4530F-MJ24AA

The Allen-Bradley MPL-A4530F-MJ24AA MPL series servo motor is a compact brushless high performance servo motor that uses permanent magnet technology. The rated speed of the motor is 2800 RPM and the maximum speed it supports is also 2800 RPM. The continuous stall torque rating of the motor is 74 pounds on an inch and the maximum stall torque rating is 180 pounds on an inch. The weight of the motor is 16 pounds. The motor’s rated output is 1.9 kilowatts and the rotor inertia is 0.0036 lb-in-s2. The MPL-A4530F-MJ24AA servo motor is part of the MPL low-inertia motor family and it features a 24 Volts DC rated holding brake and a 1024 sin/cos rated multi-turn encoder. The brake backlash rating is 37 arc minutes, the holding torque rating is 90 pounds on an inch, the release time rating is 110 milliseconds, and the brake weight is 20 pounds. The motor voltage class is 200 Volts. The frame size of the servo motor is 130 millimeters and its magnet stack length is 76.2 millimeters. The motor shaft has a key, but there is no shaft seal.

A shaft seal kit can be ordered from Allen-Bradley for the MPL-A4530F-MJ24AA MPL series compact brushless high performance servo motor if it needs one. The protection rating of this MPL series servo motor is IP 50 by default. The use of a shaft seal kit and environmentally sealed cable connectors increases this protection rating to IP 66. The motor comes with a bayonet cable connector. An IEC metric flange is provided on the MPL-A4530F-MJ24AA servo motor for mounting. The radial load force ratings for the MPL-A4530F-MJ24AA servo motor are 293 pounds at 500 RPM, 232 pounds at 1000 RPM, 185 pounds at 2000 RPM, and 161 pounds at 3000 RPM. The MPL-A4530F-MJ24AA servo motor should only be powered on after it is installed. Only trained electrical technicians should perform the motor installation process.