MPL-A4540C-SJ24AA

The MPL-A4540C-SJ24AA AC servo motor by Allen-Bradley is a highly-dynamic brushless AC servo motor from the MPL servo motor series that is designed to meet the demands of high-performance motion systems. This servo motor features advanced winding technology, which yields up to 40% higher torque than conventional servo motors. All MPL series servo motors come with an enhanced thermal management system for enhanced motor performance and reduced downtime. The MPL-A4540C-SJ24AA servo motor has a 3-phase voltage rating of 200 Volts AC and a rated motor speed of 1500 rpm at 1.5 kilowatts of output. The MPL-A4540C-SJ24AA servo motor has a peak torque rating of 240 pounds on an inch, and it is capable of operating at specified maximum radial and axial shaft loads. This motor has a 24 Volts DC spring-set break with 90 pounds on an inch of holding torque rating, and it is suitable for applications where a fail-safe brake is required.

The MPL-A4540C-SJ24AA servo motor uses a single-turn type of absolute encoder for precise and accurate position feedback, and it may be used as a component of an Allen-Bradley Kinetix system’s safe-off feature in applications where extra safety precautions are required. The MPL-A4540C-SJ24AA servo motor has an onboard memory which retains motor identity, and it reports this identity to a closed loop system upon startup through an embedded communication link. The MPL-A4540C-SJ24AA servo motor has a circular (bayonet) type of connector for power and feedback cables, and it can be aligned with machines by using a mounting pilot. It has an aluminum housing and a carbon steel shaft key that is used for a rigid connection. It has a frame size of 130 millimeters and a stacking length of 4 inches. The MPL-A4540C-SJ24AA servo motor has an IP 50 environmental rating and an operating range of 0 to 40 degrees Celsius.