MPL-A4540F-MK22AA

Designed by Allen-Bradley, the MPL-A4540F-MK22AA servo motor is a premium permanent magnet rotary servo motor that features a motor speed of 3000 revolutions per minute. The MPL-A4540F-MK22AA servo motor comes with a 4-inch magnetic stack length. The MPL-A4540F-MK22AA servo motor features the IEC metric mounting flange and the standard factory designated control options. It comes with no brake but with a circular bayonet facing the shaft and the MPL-A4540F-MK22AA servo motor is designed without a shaft key or shaft seal on its enclosure. The MPL-A4540F-MK22AA servo motor comes with the protective cap attached to the motor shaft. To remove the protective cap, avoid the use of a hammer or other tools that can easily cause damage to the motor shaft. Instead, pry off the protective cap by hand or with a screwdriver.

The MPL-A4540F-MK22AA servo motor should be installed and operated in an environment that meets the minimal conditions that are conducive to proper operation. These conditions are outlined in the user manual packaged with the drive. Ensure that the MPL-A4540F-MK22AA servo motor is installed by technicians who are familiar with the Allen-Bradley servo motors. This is to ensure that the minimal installation conditions have been met. In addition, during the installation process, the technicians should provide a drip loop on each of the cables that are connected to the motor. This is to avoid water flowing to the servo motor, which could cause serious damage to the motor. Where possible, provide proper shields to the motor housing and the shaft seals to keep the servo motor and its components safe from contamination by foreign matter or fluids that can damage the unit.