MPL-A520K-MJ72AA

The MPL-A520K-MJ72AA servo motor is one of the MPL series servo motors manufactured by Allen-Bradley. It features a small frame size of 165 millimeters, and it is a brushless type of servo motor with low inertia ratings. The MPL-A520K-MJ72AA servo motor is a 200 Volts Class servo motor with 230 Volts-rated armature winding. It features high-performance feedback with a multi-turn absolute position encoder that supports the Hiperface or Hi-Performance Interface Protocol. This servo motor also implements “smart motor technology” to provide automatic identification of the motor and to reduce the commissioning time. The MPL-A520K-MJ72AA servo motor comes with a steel shaft key which allows pulleys, couplings, and belts to be mechanically connected to the motor shaft. The motor comes with a nominal speed rating of 3500 RPM and a maximum speed rating of 4000 RPM and it provides a continuous stall torque of 95 pounds on an inch and peak stall torque of 215 pounds on an inch.

The Allen-Bradley MPL-A520K-MJ72AA MPL series servo motor has a rated motor output of 3.5 kilowatts. This MPL series servo motor does not have an integrated holding brake. The MPL-A520K-MJ72AA servo motor weighs approximately 9.8 kilograms and its rotor inertia rating is 0.000783 kilograms per square meter. At a motor speed of 4000 RPM, the maximum radial and axial shaft load ratings are 22 and 36 kilograms, respectively. The MPL-A520K-MJ72AA servo motor is equipped with 2 connectors which are an M23 feedback connector and an M40 power/brake connector. Both connectors are SpeeTEC-ready DIN connectors which can be rotated by up to 180 degrees. The housing of the motor has an IP 50 protection rating that can be upgraded to IP 66 by using an optional shaft seal and 2090-series motor cable connectors. The shaft seal and cable connectors must be ordered separately from the MPL-A520K-MJ72AA servo motor.